Porsche 962

My current WIP Revell's Porsche 962 with Speedline's Rothmans Decals. The work needed to make this kit accurate is more than I feel like doing but it will be a reasonable fascimile. paint is Krylon White(Spraycan) with Krylon Regal Blue(airbrushed). The rear wheel cover disks had to be enlarged and spacers added to the back as Revell(Hasegawa) made them the same for front and rear.
http://img38.imagefra.me/img/img38/1/11/30/f_2vp9pp7qlam_66b2f01.jpg
http://img38.imagefra.me/img/img38/1/11/30/f_grq4wglkm_b236db2.jpg
http://img39.imagefra.me/img/img39/1/11/30/f_grq4wgoom_8edb066.jpg
http://img38.imagefra.me/img/img38/1/11/30/f_grq4wgpkm_4c6ac78.jpg
http://img39.imagefra.me/img/img39/1/11/30/f_grq4wgqnm_a558b94.jpg

That is seriously beautiful work and excellent photos.

Decals have been added.

http://img39.imagefra.me/img/img39/1/12/4/f_grq4xa57m_3f13fa2.jpg
http://img37.imagefra.me/img/img37/1/12/4/f_grq4xa5am_c5640cd.jpg

Nice work! Looks cleanly done!

Mark

Great progress. Decals, and interior look awesome. :thumbsup:

Great looking which doesn´t come as a surprise. Your work is always spot-on.

The rear wheel cover disks had to be enlarged and spacers added to the back as Revell(Hasegawa) made them the same for front and rear.

What do you mean by enlarging and did you do it?


Cheers


Robert

Great looking which doesn´t come as a surprise. Your work is always spot-on.



What do you mean by enlarging and did you do it?


Cheers


Robert

I used a circle template to layout and cut out a new disk, I then used a punch for the center cutout. The disk was glued over the original disk. Thin pieces of strip plastic were then glued on back to extend the blades. Tubing on the back was added to make cover flush with the wheel.