99 silverado u1041 code
dirtbikeryder45230
08-30-2009, 08:36 PM
installed new starter' went to rehook battery starter engaged n cranked had too refix wires on starter, truck didnt run after that cranks fine :uhoh: scanned came up with a u1041 code found no spark installed new crank sensor nothing found low voltage at crank sensor.... any ideals ???? pcm blowed ???
j cAT
08-31-2009, 10:18 AM
installed new starter' went to rehook battery starter engaged n cranked had too refix wires on starter, truck didnt run after that cranks fine :uhoh: scanned came up with a u1041 code found no spark installed new crank sensor nothing found low voltage at crank sensor.... any ideals ???? pcm blowed ???
step one check all fuses with a meter..
step one check all fuses with a meter..
dirtbikeryder45230
08-31-2009, 09:22 PM
step one check all fuses with a meter..
thanks for the reply found the problem had wire come out of terminal end of connector at crank sensor :iceslolan
thanks for the reply found the problem had wire come out of terminal end of connector at crank sensor :iceslolan
j cAT
08-31-2009, 09:26 PM
thanks for the reply found the problem had wire come out of terminal end of connector at crank sensor :iceslolan
that code is a comunication error so the pcm with no engine rotation signal will not create spark..
some have found corroded connections there..
that code is a comunication error so the pcm with no engine rotation signal will not create spark..
some have found corroded connections there..
Automotive Network, Inc., Copyright ©2024