1989 Silverado anti-lock brake light
ellis479
08-08-2009, 06:29 AM
Hello, I have a 1989 Chevy Silverado 4X4. I was having a problem with the brake system not having a good pedal and stopping power. I replaced all parts on the rear, and now the brakes are fine. I have had an anti-lock brake warning light in the past and could reset it by disconnecting the battery for a short time. The light will not reset now, this truck has disk brakes on the front and anti-lock system on the rear, with brake shoes. have a new brake swith, and the emergency brake light is working properly. I do not have an OB1 to test a vehicle this old. Any suggestions, besides unplugging the bulb?? Thanks ellis479
2000CAYukon
08-08-2009, 11:55 AM
You can get the ABS code(s) by jumping Terminal A with Terminal H, see http://www.troublecodes.net/GM/
The Aritcle describes the Codes for RWAL http://www.aa1car.com/library/abs_kelseyhayes_rwal.htm
//2000CAYukon
The Aritcle describes the Codes for RWAL http://www.aa1car.com/library/abs_kelseyhayes_rwal.htm
//2000CAYukon
Automotive Network, Inc., Copyright ©2024