|
|
Little thumping while idlingpauleypav609 08-05-2009, 04:03 PM 2003 Taurus wagon,24 valve DOHC,Duratec Has anyone encountered a periodic rumble/burp/thumping while idling in gear.RPM gauge fluctuates slightly. Could it be clogged fuel injector or maybe a sign of something more serious on the horizon. Thanks for any and all help with this. shorod 08-05-2009, 10:28 PM Welcome to the forum! Sounds like a misfire. When was the last tune up performed? What year is your Taurus, and which engine does it have? -Rod pauleypav609 08-06-2009, 03:08 AM It's been a while since the last tune up.I replaced the wires and 3 of the spark plugs when the car had 30,000 miles on it,it now has 74,000. Do you have to remove the OH cam to replace the 3 rear spark plugs? If so probally time for a professional tune up. Thanks for the fast response. shorod 08-06-2009, 07:39 AM You certainly won't have to remove the cam to change out the last 3, but it would likely be an easier job if you removed the upper intake manifold. I haven't worked on a 2003 Taurus, but even on my V6 and V8 SHOs where I did remove the upper intake, after the first time it took less than an hour hood up to hood down to change out the bank 1 (rear) spark plugs and wires(V6)/Coil on Plugs(V8). -Rod pauleypav609 08-09-2009, 08:00 PM Thanks Rod, Not sure what I was thinkin',that's just it I wasn't thinkin'. Intake manifold that's it. Would you recommend a slightly knowledgeable amateur tackleing the job? shorod 08-09-2009, 09:22 PM Again, I don't have experience on the 2003, so I'm not sure how much more difficult they could make it than the mid to late 90's engines. If you have a pretty wide selection of sockets, extensions, and wobbles, patience, and are mechanically inclined, I don't think you'd have too much difficulty performing the job. -Rod vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|