98 Breeze drivers side lower control arm removal
rjmiller6
07-12-2009, 08:09 AM
Hi,
I'm trying to keep my 98 Breeze alive at almost 170K miles by replacing the subject. After fighting with this job for most of the most of the day yesterday I got all the bolts removed with the exception of the one as viewed from the driver's side wheel (leftmost corner protruding horizontal through the control arm (see attached picture)). I can't seem to get access to the nut on the backside of this bolt no matter what I try, at least not with the tools I own. I see that there is a small cut away in the body/frame for access to this nut but I still cant seem to get a wrench or socket in there to hold it.
Does anyone have any suggestions on tools to do this job or even what size this nut is? Thank you!
http://www.automotiveforums.com/forum/images/kirsch/misc/progress.gif
I'm trying to keep my 98 Breeze alive at almost 170K miles by replacing the subject. After fighting with this job for most of the most of the day yesterday I got all the bolts removed with the exception of the one as viewed from the driver's side wheel (leftmost corner protruding horizontal through the control arm (see attached picture)). I can't seem to get access to the nut on the backside of this bolt no matter what I try, at least not with the tools I own. I see that there is a small cut away in the body/frame for access to this nut but I still cant seem to get a wrench or socket in there to hold it.
Does anyone have any suggestions on tools to do this job or even what size this nut is? Thank you!
http://www.automotiveforums.com/forum/images/kirsch/misc/progress.gif
Automotive Network, Inc., Copyright ©2024