99 sl2 ABS light

Is there a fuse that i can take out or something that will turn off my ABS and Parking Break lights off?

Is there a fuse that i can take out or something that will turn off my ABS and Parking Break lights off?

Why not fix it?

The parking brake light is on for :
a) low fluid pressure
b) emergency brake is on
c) ABS Module indicates error
d) HYDRAULIC FAILURE POSSBILE

Bc your abs light is also on, its more likely option c. BUT i would not risk it. FIX THE ISSUE

I know that the ABS module is not working i have had my uncle get the codes and found that it is the ABS module is broke. I dont have the money to fix it so i was wondering if there is any way just to turn the lights off.

I had the same issue. The ABS and parking break would always be lit, but the ABS and my brakes as a whole worked fine. It started right after I changed my front brakes, and I was told that it probably meant I didn't bleed them properly, or that I might have hit the sensor.

Usually the ABS Sensors are dirty at the spindle. I have yet to see an ABS Module that is actually bad. 9/10 times its just dirt in the sensor or the reluctor ring.