2001 Aztek - fuel pump
72mino
05-19-2009, 04:54 PM
I am going to replace the fuel pump on a friends Aztek in his work parking lot. I already cleaned the corrosion off the pass through plug. I jumped 12V to the fuel pump wiring and it didn't run, so I am certain it is the pump.
Now for the question. In order to drop the tank, do I need to jack up the car in order to have the needed clearance to get the fuel tank straps off?
Dustin
Now for the question. In order to drop the tank, do I need to jack up the car in order to have the needed clearance to get the fuel tank straps off?
Dustin
72mino
05-30-2009, 05:21 AM
If anyone cares, I did jack up the back of the car a bit and it was tight getting the straps off, so it was necessary. Ramps would be easier, but it doesn't run.
It turns out I was wrong about the fuel pump (I was just replacing the pump, not the sending unit.) There is a 4 terminal connector on top of the sending unit and 1 of the contacts was corroded away completely, so now I have an e-bay fuel pump that I don't need and I have to buy a sending unit. Gotta love those weather-pack connectors.
Dustin
It turns out I was wrong about the fuel pump (I was just replacing the pump, not the sending unit.) There is a 4 terminal connector on top of the sending unit and 1 of the contacts was corroded away completely, so now I have an e-bay fuel pump that I don't need and I have to buy a sending unit. Gotta love those weather-pack connectors.
Dustin
Automotive Network, Inc., Copyright ©2024