WIP: Subaru Impreza WRC 2004 Rally Japan
Entau
05-18-2009, 02:33 AM
Hi guys, i'm having a wrc group built with my local forum, so i will put my MB Clk-Gtr aside 1st :tongue:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3633.jpg
im going to use this PE set :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3630.jpg
drill out holes on both sides to insert seatbelts
there's a huge gap between the wheel arch and body, so i add some styrene card to extend the wheel arch
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3637.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3638.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3639.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3640.jpg
there's a huge gap at this angle, now it is fix with styrene card, forgot to take pic before mod :tongue:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3636.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3635.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3634.jpg
dry fit of the roll cage, since im going to add some wiring, seat belts & some detailing, this is to see where the wiring goes, where fits and where not, since this rollcage is quite complicated, so proper planning of glueing is important, and i spot 2 protuding peg at behind the seat that serve no purpose, i guess it is because the chassis is from 2001 version, which suppose had something there
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3658.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3658-1.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3659.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3664.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3668.jpg
quick mock up
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3682.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3687.jpg
though i'm building the rally japan, i got another set of tarmac wheels and since i like tarmacs wheel i lowered the suspension and decided to had 2 sets of wheels :p
I only had 1 bottle of finisher ricebox's subaru wrc blue, i worried i might run out halfway, so i mix a custom metalic blue with mr color metallic blue + gaia ultra blue + flurescent pink as base coat, and apply the wrc blue on top of it
here's the comparison:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3705-D.jpg
though not clearly shown in pics, the A+B results are a deeper blue which i think close enough to the impreza's mica blue
drill some holes at the roll cage
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3710.jpg
since i already remove the wiper nozzles earlier, i got no choice but to scratch it
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3715.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3714.jpg
left is shaped, right is unshape plastic plate 0.25mm cement on stretch sprue
drill some holes again at the bumper
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3721.jpg
use some 0.4mm dia rivet with 0.75 diameter from hobby design
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3718.jpg
http://www.hobbyeasy.com/esupplier/images/HOBBY1234/HD07-0007A.jpg
here is how it looks
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3717.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3633.jpg
im going to use this PE set :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3630.jpg
drill out holes on both sides to insert seatbelts
there's a huge gap between the wheel arch and body, so i add some styrene card to extend the wheel arch
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3637.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3638.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3639.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3640.jpg
there's a huge gap at this angle, now it is fix with styrene card, forgot to take pic before mod :tongue:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3636.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3635.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3634.jpg
dry fit of the roll cage, since im going to add some wiring, seat belts & some detailing, this is to see where the wiring goes, where fits and where not, since this rollcage is quite complicated, so proper planning of glueing is important, and i spot 2 protuding peg at behind the seat that serve no purpose, i guess it is because the chassis is from 2001 version, which suppose had something there
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3658.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3658-1.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3659.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3664.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3668.jpg
quick mock up
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3682.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3687.jpg
though i'm building the rally japan, i got another set of tarmac wheels and since i like tarmacs wheel i lowered the suspension and decided to had 2 sets of wheels :p
I only had 1 bottle of finisher ricebox's subaru wrc blue, i worried i might run out halfway, so i mix a custom metalic blue with mr color metallic blue + gaia ultra blue + flurescent pink as base coat, and apply the wrc blue on top of it
here's the comparison:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3705-D.jpg
though not clearly shown in pics, the A+B results are a deeper blue which i think close enough to the impreza's mica blue
drill some holes at the roll cage
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3710.jpg
since i already remove the wiper nozzles earlier, i got no choice but to scratch it
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3715.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3714.jpg
left is shaped, right is unshape plastic plate 0.25mm cement on stretch sprue
drill some holes again at the bumper
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3721.jpg
use some 0.4mm dia rivet with 0.75 diameter from hobby design
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3718.jpg
http://www.hobbyeasy.com/esupplier/images/HOBBY1234/HD07-0007A.jpg
here is how it looks
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3717.jpg
SeanRally
05-18-2009, 08:34 AM
Hi your progress is very interesting to watch, you should choose a tarmac rally now that you have lowered the suspension,:smile:
Entau
05-18-2009, 09:57 PM
i couldnt find the monte carlo decal or other tarmac rally :shakehead, i'll see how things goes as i had a 2005 307WRC that had 2 set of monte carlo decals, the problem is petter solberg' car is NOT #1 in 2005 :p
rallymaster
05-19-2009, 01:29 PM
i couldnt find the monte carlo decal or other tarmac rally :shakehead, i'll see how things goes as i had a 2005 307WRC that had 2 set of monte carlo decals, the problem is petter solberg' car is NOT #1 in 2005 :p
I think I should have spare decals for Solberg 2005 Monte Carlo version...
(I'll build 2006 car with Renaissance TK).
Let me know if you're interested in getting them.
I think I should have spare decals for Solberg 2005 Monte Carlo version...
(I'll build 2006 car with Renaissance TK).
Let me know if you're interested in getting them.
Entau
05-19-2009, 10:04 PM
thanks Phil, i couldnt decide which version to built yet, :p
anyway, tiny update :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3729.jpg
safety aid box
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3722.jpg
gearbox and lower arms painted with gun metal, semigloss black, gold & titanium
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3727.jpg
discbrake with pe, painted with metalic blue and steel, caliper in titanium
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3733.jpg
bucket seat, really hard to remove all wrinkles :banghead:
anyway, tiny update :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3729.jpg
safety aid box
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3722.jpg
gearbox and lower arms painted with gun metal, semigloss black, gold & titanium
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3727.jpg
discbrake with pe, painted with metalic blue and steel, caliper in titanium
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3733.jpg
bucket seat, really hard to remove all wrinkles :banghead:
Entau
06-01-2009, 10:39 PM
tiny update:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3772.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3764.jpg
the final color which i post earlier the A+B, the B is ricebox's wrc blue which is matt, so i still had to apply another 1-2 gloss clear before decal, another wait...
scratchbuilt some component, from left i think is leg rest?, mic/communication controller, LCD screen
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3770.jpg
some CF (Carbon Fiber) decal parts
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3767.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3769.jpg
those CF above is from KA models, though the scale size is not very small, but it looks ok, coz the silver is actually darker shade, compare below CF from crazy modeler which a bit fake when zoom in
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3777.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3772.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3764.jpg
the final color which i post earlier the A+B, the B is ricebox's wrc blue which is matt, so i still had to apply another 1-2 gloss clear before decal, another wait...
scratchbuilt some component, from left i think is leg rest?, mic/communication controller, LCD screen
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3770.jpg
some CF (Carbon Fiber) decal parts
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3767.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3769.jpg
those CF above is from KA models, though the scale size is not very small, but it looks ok, coz the silver is actually darker shade, compare below CF from crazy modeler which a bit fake when zoom in
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN3777.jpg
prortiz80
06-03-2009, 07:51 AM
good job on the laying the Carbon Fiber looks good nice scath building on those parts maybe u could show up a pic of the part u where making for ref. but over all im really impressed with your work. great job
rollin80s
06-04-2009, 01:26 AM
looks great bro, diggin all the carbon work and he scratch building. can't wait to see the finished product..
Entau
06-04-2009, 03:17 AM
Capture from http://www.subaru-msm.com/global/entertain/index.html
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/imprezacockpit.jpg?t=1244103225
although an illustration, it shows what's inside the 2004 cockpit
and some reference pics, not exactly the car driven by Petter Solberg but at least some close up shot on the cockpits :)
http://photos.keepturningleft.com/thumbnails.php?album=19
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/imprezacockpit.jpg?t=1244103225
although an illustration, it shows what's inside the 2004 cockpit
and some reference pics, not exactly the car driven by Petter Solberg but at least some close up shot on the cockpits :)
http://photos.keepturningleft.com/thumbnails.php?album=19
Entau
06-06-2009, 11:10 AM
after gloss coat, metallic blue had become deeper
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_5705-a.jpg
here is after 2000 wetsand, autosol, tamiya compound coarse and fine, only roof, the rest haven't polish yet
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_5705-a.jpg
here is after 2000 wetsand, autosol, tamiya compound coarse and fine, only roof, the rest haven't polish yet
Entau
06-10-2009, 09:48 PM
Here's some pics of the body under the sun :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4051.jpg
this is after 2000 wetsand, Autosol, Tamiya Coarse Compound, Fine & Finish, the metallic flakes makes the camera keep focusing on the flakes instead of the reflection :P
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4053.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4055.jpg
only the roof had been polish until Tamiya's Finish Compound, the rest is just wetsand with 2000 and Autosol
here is the underchasis, almost done, not glue yet, just dryfit, weathered the exhaust and engine a bit
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4037.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4040.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4038.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4039.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4041.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4042.jpg
the PE disc brake havent install yet
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4043.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4045.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4044.jpg
the seat, semi-gloss, kevlar decal, 2 layer gloss coat, wetsand and polish, mask and spray flat, then disaster struck, notice the left seat, some kevlar tear off when removing masking tape, i had to cut some kevlar decal from my Peugeot 307 wrc which luckily had 3 seat decals, but the color was slightly different, so i use smoke to level it, but now it looks terrible :banghead:
door panel with CF decal, not clear coat yet
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4049.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4051.jpg
this is after 2000 wetsand, Autosol, Tamiya Coarse Compound, Fine & Finish, the metallic flakes makes the camera keep focusing on the flakes instead of the reflection :P
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4053.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4055.jpg
only the roof had been polish until Tamiya's Finish Compound, the rest is just wetsand with 2000 and Autosol
here is the underchasis, almost done, not glue yet, just dryfit, weathered the exhaust and engine a bit
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4037.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4040.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4038.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4039.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4041.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4042.jpg
the PE disc brake havent install yet
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4043.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4045.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4044.jpg
the seat, semi-gloss, kevlar decal, 2 layer gloss coat, wetsand and polish, mask and spray flat, then disaster struck, notice the left seat, some kevlar tear off when removing masking tape, i had to cut some kevlar decal from my Peugeot 307 wrc which luckily had 3 seat decals, but the color was slightly different, so i use smoke to level it, but now it looks terrible :banghead:
door panel with CF decal, not clear coat yet
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4049.jpg
gasdriverca
06-12-2009, 04:41 PM
Outstanding work keep it up!
Entau
06-14-2009, 10:07 PM
Some update
here is the rear wing painted in wrc blue, gloss coat, masked and spray black for the carbon fiber
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4059.jpg
trace the carbon fiber shape on masking tape, for duplication, i made a template on plastic-card, then transfer the template on back of CF decal, because its a symetrical design, u can do this, otherwise u'll only get opposite side
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4057.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4058.jpg
took me around 3 hours for tracing all the 25 pieces to the decal sheet, and here is how it looks after another 3 hours
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4079.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4081.jpg
and its not done yet, i still need to do some touch up
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4068.jpg
side panel done with gloss coat
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4069.jpg
fire extinguisher decaled and gloss coat
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4071.jpg
side mirror CF decaled and gloss coat
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4072.jpg
centre console CF and semi-gloss coated
side roll cage done with flat black on the pads
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4061.jpg
here is the rear wing painted in wrc blue, gloss coat, masked and spray black for the carbon fiber
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4059.jpg
trace the carbon fiber shape on masking tape, for duplication, i made a template on plastic-card, then transfer the template on back of CF decal, because its a symetrical design, u can do this, otherwise u'll only get opposite side
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4057.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4058.jpg
took me around 3 hours for tracing all the 25 pieces to the decal sheet, and here is how it looks after another 3 hours
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4079.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4081.jpg
and its not done yet, i still need to do some touch up
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4068.jpg
side panel done with gloss coat
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4069.jpg
fire extinguisher decaled and gloss coat
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4071.jpg
side mirror CF decaled and gloss coat
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4072.jpg
centre console CF and semi-gloss coated
side roll cage done with flat black on the pads
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4061.jpg
chato de shamrock
06-16-2009, 07:01 PM
Looks very good so far.
Entau
06-18-2009, 10:10 PM
Updates:
Manage to apply some decal last night, from 50cm away it looks ok
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4091.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4107.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4105.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4103.jpg
Close up of the damn brittle decal
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4104.jpg
it crack before i even apply Softer, and crack even more after i apply softer, now i need to mix some fluorescent yellow and hopefully can touch up those crack lines, other part where decals sit on flat surface was ok
Side door decal gloss coat, after few days, wetsand with 1000 & 2000 then compound with Autosol, Tamiya Coarse & Fine Compound
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4098.jpg
here's the gloss coat without wetsand and compound
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4100.jpg
Manage to apply some decal last night, from 50cm away it looks ok
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4091.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4107.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4105.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4103.jpg
Close up of the damn brittle decal
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4104.jpg
it crack before i even apply Softer, and crack even more after i apply softer, now i need to mix some fluorescent yellow and hopefully can touch up those crack lines, other part where decals sit on flat surface was ok
Side door decal gloss coat, after few days, wetsand with 1000 & 2000 then compound with Autosol, Tamiya Coarse & Fine Compound
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4098.jpg
here's the gloss coat without wetsand and compound
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4100.jpg
gasdriverca
06-19-2009, 05:29 PM
Your persistance is paying off in the end with the CF'ing! and the splitting of the brittle decals happened to me also,its the florescent decals that it only happens to aswell(hate it when that happens)
rollover
06-19-2009, 06:14 PM
Great job so far, the paint is excellent. What really impresses me is the screw holes you put in the front air dam seem to be spaced and aligned perfectly.
Entau
06-21-2009, 10:18 AM
more updates:
kinda sad update, thought i can do the decal better on the other side, but turn out to be a nightmare, there's a bubble, so i tried poke it & flatten it but some how the brittle decal didnt stick well and fell off creating a hole, i tried touch up but i mix the paint too thick, so i sand it and the worst i get, so i try paint florescent yellow on white decal & patch it, but the original decal were a bit translucent, thought of stripping the decal but that means another 1 month of wait, okay, enough talk, here's the pics
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4119-zoom.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4130.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4128.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4124.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4123.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4119.jpg
really a bad experience for my 1st car with decals :banghead::banghead:
kinda sad update, thought i can do the decal better on the other side, but turn out to be a nightmare, there's a bubble, so i tried poke it & flatten it but some how the brittle decal didnt stick well and fell off creating a hole, i tried touch up but i mix the paint too thick, so i sand it and the worst i get, so i try paint florescent yellow on white decal & patch it, but the original decal were a bit translucent, thought of stripping the decal but that means another 1 month of wait, okay, enough talk, here's the pics
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4119-zoom.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4130.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4128.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4124.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4123.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4119.jpg
really a bad experience for my 1st car with decals :banghead::banghead:
rollin80s
06-22-2009, 12:09 PM
hey man, you know what. it looks great for it being your first car w/decals. my hats off to you for trying your best..
spideyman
06-22-2009, 12:36 PM
I think....I think Im in love.....(even with the decals) :icon16:
:wave:
:wave:
Rocat
06-22-2009, 02:19 PM
great work so far! the decal problem looks not so bad from here!
2.2 Straight six
06-22-2009, 08:13 PM
I have a spare seat and decal for this kit, if you'd like it to replace the one damaged by the masking tape, PM me. :)
-Moose.
-Moose.
Entau
07-09-2009, 05:40 AM
Thanks Moose :) , but I've order replacement decals from rainbowten, plan to redo the mess-up side.
So I can't do anything until replacement decals arrive, so just some small updates
Dashboard & steering, cord made with stretch sprue
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4306.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4307.jpg
STi spray using templates
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4308.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4309.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4311.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4312.jpg
So I can't do anything until replacement decals arrive, so just some small updates
Dashboard & steering, cord made with stretch sprue
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4306.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4307.jpg
STi spray using templates
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4308.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4309.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4311.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4312.jpg
kans0002
07-09-2009, 07:52 AM
this is bad ass. super clean!
Entau
07-14-2009, 11:52 PM
Replacement decal finally arrive yesterday from rainbowten, without any wait, i apply the decals, this time i sliced the complicated part into 2 pieces, decal didnt break or crack this time but i didnt manage to align perfectly, so i patch with extra decals, here is the result.
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4378.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4379.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4381.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4380.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4378.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4379.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4381.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4380.jpg
guiwee
07-15-2009, 01:17 AM
All these scoobys//You guys are gonna make me go out and get one!!
Great paint job.Did you clear over decals? Or decal then clear?
Great paint job.Did you clear over decals? Or decal then clear?
Entau
07-15-2009, 02:32 AM
clear coat, then decal, but i will clear coat once more :)
mrawl
07-15-2009, 05:32 AM
Love that interior work, very nicely done.
Entau
07-19-2009, 11:01 PM
Body Gloss Clear coat with 3 mist, then 2 wetcoat, with each layer lighty wetsand with 2000, so far no problem with the decals :) some places decal steps are completely flatten out, while some i think still need 2 layer of gloss coat, can't afford sanding through the decals right now.
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4386.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4387.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4388.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4386.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4387.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4388.jpg
Entau
08-02-2009, 04:55 AM
After 4 coat of clear, wetsand and compound, the body is done, but still not perfect, this is because i accidently over compound at some area, and i decided to stop right here..
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7267.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7259.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7261.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7262.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7266.jpg
next is the interior :tongue:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7267.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7259.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7261.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7262.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/IMG_7266.jpg
next is the interior :tongue:
car games
08-02-2009, 07:01 AM
Hi,I'm a new member of this forum,I'm a car fan and I would like to say hello to all of you!
pawlie
08-02-2009, 09:58 AM
That looks great, I'm jealeous!
rallymaster
08-02-2009, 10:32 AM
Waow, superb result ! :thumbsup:
Nice job on the rear wing carbon decals... Not easy to do...
Nice job on the rear wing carbon decals... Not easy to do...
Entau
08-02-2009, 10:47 AM
thanks guys :)
Phil, the rear wing carbon was not really hard to do, but it do takes a long time tracing all the wing surface :p
Phil, the rear wing carbon was not really hard to do, but it do takes a long time tracing all the wing surface :p
ravan17
08-02-2009, 01:32 PM
looking good, the carbon fiber work is great man.
cant wait to see it finished up
cant wait to see it finished up
nico76
08-05-2009, 11:03 AM
I am admiring before mounting
quality is exemplary
congratulation:thumbsup:
quality is exemplary
congratulation:thumbsup:
Entau
09-01-2009, 09:50 PM
Was sicked for the last few weeks, after stopping few weeks, all mood suddenly gone, worrying this, I quickly do some simple updates to keep the moods up :P
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4617.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4619.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4621.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4629.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4630.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4632.jpg
Now what's left are interiors, few under chassis parts and wheels, then its done :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4617.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4619.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4621.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4629.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4630.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4632.jpg
Now what's left are interiors, few under chassis parts and wheels, then its done :)
ben_gsr2s
09-01-2009, 11:17 PM
Great build!!
how can i miss this one :banghead:
how can i miss this one :banghead:
ben_gsr2s
09-01-2009, 11:18 PM
where do you get the Tarmac wheels?
is it from pug 307 kit?
is it from pug 307 kit?
Entau
09-01-2009, 11:57 PM
thanks ben,
the wheel is from 206, i decided to built marcus's car which use the 5 spokes
tyre is given by my friend :grinno:
the wheel is from 206, i decided to built marcus's car which use the 5 spokes
tyre is given by my friend :grinno:
kans0002
09-02-2009, 10:00 AM
i love the all the antenna on the roof.
mrawl
09-04-2009, 06:13 AM
Beautiful work, awesome level of finish and realism you have going there.
Entau
09-21-2009, 10:55 AM
thanks guys, this will be the final updates for this wip :lol:
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4685.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4681.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4680.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4679.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4677.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4683.jpg
everything is done, just need to assemble the body to the chassis :)
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4685.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4681.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4680.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4679.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4677.jpg
http://i203.photobucket.com/albums/aa155/Entau/ALL%20WIP/Impreza%20WRC%202004/DSCN4683.jpg
everything is done, just need to assemble the body to the chassis :)
kans0002
09-21-2009, 02:12 PM
super clean!
da_ashman
09-21-2009, 07:28 PM
Stunning work, fantastic detailing
Entau
09-23-2009, 12:02 AM
Here's the completed pics (http://www.automotiveforums.com/vbulletin/showthread.php?t=965997)
Automotive Network, Inc., Copyright ©2024