2001 Crown Vic PI tach installation problems
Demonangel122
02-10-2009, 07:05 PM
I have an 01' Crown Vic PI and im trying to install an aftermarket tach, but it wont work. Is there a specific wire i should wire it into?
97cv
03-01-2009, 12:21 AM
Check your ignition coil wires, See that red wire with w/ a green stripe.
Thats the pulse for the coils. Go to the DR side and see that power box, See EEC on it ? Pull it up and off now look for that same wire in that bundle.
Thats the pulse for the coils. Go to the DR side and see that power box, See EEC on it ? Pull it up and off now look for that same wire in that bundle.
Automotive Network, Inc., Copyright ©2024