Ferrari 550 Maranello Pit 24h Le Mans 2003.
sportscars24
01-11-2009, 10:04 AM
Hi
This is my bigest challenge i let you see.
I started this project arround 4 years ago,and its still not finished.
I decide to finish it this year.Its still a lot of work to do,hope to manage it.
For all to know,all pictures are made beside the work so you can see more an how i did in my way.
Parts i use are:
Pit stand from Le Mans Miniatures.
2 Scale Productions 550 Maranello Curbside kits.
The whole thing is around 60% scratch build.But more to this later.
First i let you see some of my over 200 reference pictures.
http://foto.arcor-online.net/palb/alben/20/673120/6664393838343662.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3365613334326164.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3139313366303537.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3331383064303463.jpg
The idea to build this i get when i painted the body and did some mistakes.
I had to clean the body and start to think what i do next.
I want to build a complete engined car with chassis and everything and it should display at the moment when the mechanics take apart and clean it before the main race start saturday afternoon.
That was the problem,cause there i no kit exist with engine and chassis.
So i have to build scratch.....:naughty:
So i started to collect reference pictures from chassis engine,pit,and ...and..and..
The engine i took from the Revell 612 Scaglietti,but i have to change a lot,but lets see that later.
First i start to cut the body in peaces.
http://foto.arcor-online.net/palb/alben/20/673120/6432626562396139.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3830313731393733.jpg
After cut the body in parts,i medelling the inside of the doors.
http://foto.arcor-online.net/palb/alben/20/673120/3761323963386135.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6637373934353136.jpg
Next was to create the inside of the open rear.
http://foto.arcor-online.net/palb/alben/20/673120/3230316664666531.jpg
At this pic you see how i started,at the end it will look complete diffrent as you can see later.I just have this one pic of that work.
Now i paint the bodys with italian bright red.First i primer gray,then it came white and at the end i use the bright red.
As you can see the bodys are already with decals and i used Scale Motorsport Carbon decals for diffusor and at the sides.All body parts are clear coated.
http://foto.arcor-online.net/palb/alben/20/673120/3961393134616238.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3665316161386361.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3437326261626264.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3037356536666261.jpg
Now the cuted body.
http://foto.arcor-online.net/palb/alben/20/673120/3339616563643562.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6466383932376430.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6230363662313433.jpg
Next was to build the chassis and it was really a challenge to me.
I have a lot of pictures but how should i start.
First i had to measure the body that i know how big it must be at the end.
And i just started.
http://foto.arcor-online.net/palb/alben/20/673120/3932616265653264.jpg
That was the beginning of my challenge.
http://foto.arcor-online.net/palb/alben/20/673120/3166323738383639.jpg
Here with the Rollcage.
For next i let the pictures talk,cause my englisch is not that perfect that i can explain everything.Hope you all forgive me...:wink:
http://foto.arcor-online.net/palb/alben/20/673120/3236663164303938.jpg
Realise the front.
http://foto.arcor-online.net/palb/alben/20/673120/3635316432616662.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6664393463363563.jpg
Sometimes i fit the body to see if anything fits to the scale and sometimes also the measure again.
http://foto.arcor-online.net/palb/alben/20/673120/3362623634656562.jpg
Go on by the front.
Next was to create the cockpit.
http://foto.arcor-online.net/palb/alben/20/673120/6462666462393262.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6532343637386465.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6137663965643130.jpg
Now the rear.
http://foto.arcor-online.net/palb/alben/20/673120/3234343634393063.jpg
And now it looks already as a chassis...:iceslolan
http://foto.arcor-online.net/palb/alben/20/673120/3632623331663139.jpg
As you can see on the pic i started to clean the whole chassis with spatula.
Later it will be cleaned with sandpaper.
http://foto.arcor-online.net/palb/alben/20/673120/6139656138346436.jpg
Again fit the body for you to see how it looks...
http://foto.arcor-online.net/palb/alben/20/673120/6465393562343462.jpg
Next i pre primered the chassis and start with detailling.
http://foto.arcor-online.net/palb/alben/20/673120/6665613036333861.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3539393231643530.jpg
Next i primer all again,paint with Alclad gloss lack and at the paint with alclad Duralaluminium.
http://foto.arcor-online.net/palb/alben/20/673120/3335356164323138.jpg
As you can see i added additional parts to the car lifts.
The mechanics use them as security inside the pit and also to move the car higher to work better under the car.( You can see them at the reference pics at the beginning of the tread,i have mark them.)
Now fit the body again.
http://foto.arcor-online.net/palb/alben/20/673120/3561356634386438.jpg
Next was to create the engine.
As i told i used the engine from the Revell Ferrari 612 Scaglietti.
http://foto.arcor-online.net/palb/alben/20/673120/3564633539656435.jpg
I started to build an change what was to change.
http://foto.arcor-online.net/palb/alben/20/673120/3863373463663333.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3161633863366366.jpg
Between building the engine i made the brakes.
For them i took the Le Mans Miniature Brakes and change them a little bit.
http://foto.arcor-online.net/palb/alben/20/673120/3230303962343535.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6237613335356236.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3836353238303164.jpg
Now again to the engine.
As you can see the engine looks completely diffrent.
http://foto.arcor-online.net/palb/alben/20/673120/3432383236656165.jpg
For the Airintakes i used Model Factory Hiro parts.
And the gage is made from PE parts trash.
http://foto.arcor-online.net/palb/alben/20/673120/3965376434653739.jpg
now the finished engine.
http://foto.arcor-online.net/palb/alben/20/673120/3437303261313332.jpg
With the coloring of the exhausts i am not that happy and i will change it again.
http://foto.arcor-online.net/palb/alben/20/673120/3236623563643431.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3534633536396634.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3138623530383163.jpg
Ok for now lets have a break....to be continued....:smile:
This is my bigest challenge i let you see.
I started this project arround 4 years ago,and its still not finished.
I decide to finish it this year.Its still a lot of work to do,hope to manage it.
For all to know,all pictures are made beside the work so you can see more an how i did in my way.
Parts i use are:
Pit stand from Le Mans Miniatures.
2 Scale Productions 550 Maranello Curbside kits.
The whole thing is around 60% scratch build.But more to this later.
First i let you see some of my over 200 reference pictures.
http://foto.arcor-online.net/palb/alben/20/673120/6664393838343662.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3365613334326164.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3139313366303537.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3331383064303463.jpg
The idea to build this i get when i painted the body and did some mistakes.
I had to clean the body and start to think what i do next.
I want to build a complete engined car with chassis and everything and it should display at the moment when the mechanics take apart and clean it before the main race start saturday afternoon.
That was the problem,cause there i no kit exist with engine and chassis.
So i have to build scratch.....:naughty:
So i started to collect reference pictures from chassis engine,pit,and ...and..and..
The engine i took from the Revell 612 Scaglietti,but i have to change a lot,but lets see that later.
First i start to cut the body in peaces.
http://foto.arcor-online.net/palb/alben/20/673120/6432626562396139.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3830313731393733.jpg
After cut the body in parts,i medelling the inside of the doors.
http://foto.arcor-online.net/palb/alben/20/673120/3761323963386135.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6637373934353136.jpg
Next was to create the inside of the open rear.
http://foto.arcor-online.net/palb/alben/20/673120/3230316664666531.jpg
At this pic you see how i started,at the end it will look complete diffrent as you can see later.I just have this one pic of that work.
Now i paint the bodys with italian bright red.First i primer gray,then it came white and at the end i use the bright red.
As you can see the bodys are already with decals and i used Scale Motorsport Carbon decals for diffusor and at the sides.All body parts are clear coated.
http://foto.arcor-online.net/palb/alben/20/673120/3961393134616238.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3665316161386361.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3437326261626264.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3037356536666261.jpg
Now the cuted body.
http://foto.arcor-online.net/palb/alben/20/673120/3339616563643562.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6466383932376430.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6230363662313433.jpg
Next was to build the chassis and it was really a challenge to me.
I have a lot of pictures but how should i start.
First i had to measure the body that i know how big it must be at the end.
And i just started.
http://foto.arcor-online.net/palb/alben/20/673120/3932616265653264.jpg
That was the beginning of my challenge.
http://foto.arcor-online.net/palb/alben/20/673120/3166323738383639.jpg
Here with the Rollcage.
For next i let the pictures talk,cause my englisch is not that perfect that i can explain everything.Hope you all forgive me...:wink:
http://foto.arcor-online.net/palb/alben/20/673120/3236663164303938.jpg
Realise the front.
http://foto.arcor-online.net/palb/alben/20/673120/3635316432616662.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6664393463363563.jpg
Sometimes i fit the body to see if anything fits to the scale and sometimes also the measure again.
http://foto.arcor-online.net/palb/alben/20/673120/3362623634656562.jpg
Go on by the front.
Next was to create the cockpit.
http://foto.arcor-online.net/palb/alben/20/673120/6462666462393262.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6532343637386465.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6137663965643130.jpg
Now the rear.
http://foto.arcor-online.net/palb/alben/20/673120/3234343634393063.jpg
And now it looks already as a chassis...:iceslolan
http://foto.arcor-online.net/palb/alben/20/673120/3632623331663139.jpg
As you can see on the pic i started to clean the whole chassis with spatula.
Later it will be cleaned with sandpaper.
http://foto.arcor-online.net/palb/alben/20/673120/6139656138346436.jpg
Again fit the body for you to see how it looks...
http://foto.arcor-online.net/palb/alben/20/673120/6465393562343462.jpg
Next i pre primered the chassis and start with detailling.
http://foto.arcor-online.net/palb/alben/20/673120/6665613036333861.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3539393231643530.jpg
Next i primer all again,paint with Alclad gloss lack and at the paint with alclad Duralaluminium.
http://foto.arcor-online.net/palb/alben/20/673120/3335356164323138.jpg
As you can see i added additional parts to the car lifts.
The mechanics use them as security inside the pit and also to move the car higher to work better under the car.( You can see them at the reference pics at the beginning of the tread,i have mark them.)
Now fit the body again.
http://foto.arcor-online.net/palb/alben/20/673120/3561356634386438.jpg
Next was to create the engine.
As i told i used the engine from the Revell Ferrari 612 Scaglietti.
http://foto.arcor-online.net/palb/alben/20/673120/3564633539656435.jpg
I started to build an change what was to change.
http://foto.arcor-online.net/palb/alben/20/673120/3863373463663333.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3161633863366366.jpg
Between building the engine i made the brakes.
For them i took the Le Mans Miniature Brakes and change them a little bit.
http://foto.arcor-online.net/palb/alben/20/673120/3230303962343535.jpg
http://foto.arcor-online.net/palb/alben/20/673120/6237613335356236.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3836353238303164.jpg
Now again to the engine.
As you can see the engine looks completely diffrent.
http://foto.arcor-online.net/palb/alben/20/673120/3432383236656165.jpg
For the Airintakes i used Model Factory Hiro parts.
And the gage is made from PE parts trash.
http://foto.arcor-online.net/palb/alben/20/673120/3965376434653739.jpg
now the finished engine.
http://foto.arcor-online.net/palb/alben/20/673120/3437303261313332.jpg
With the coloring of the exhausts i am not that happy and i will change it again.
http://foto.arcor-online.net/palb/alben/20/673120/3236623563643431.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3534633536396634.jpg
http://foto.arcor-online.net/palb/alben/20/673120/3138623530383163.jpg
Ok for now lets have a break....to be continued....:smile:
allnie
01-11-2009, 12:32 PM
WAUW - that is something of a killer.:grinyes:
I am looking forward to see the completed project.
I am looking forward to see the completed project.
Robi J
01-11-2009, 12:36 PM
Hi Roger, glad to see you back on this outstanding project, I discovered this progress on MCP a few years ago and I was very impressed.
I'm tuned to follow it, now :biggrin:
Robi
I'm tuned to follow it, now :biggrin:
Robi
endac
01-11-2009, 01:53 PM
Thats a really interesting project, looks great so far, cant wait to see more.
jano11
01-11-2009, 02:06 PM
:eek: Wow!
Very brave project!
Your work on this is excellent. :thumbsup:
I'm gonna follow it closely.
Very brave project!
Your work on this is excellent. :thumbsup:
I'm gonna follow it closely.
klutz_100
01-11-2009, 02:08 PM
This is the kind of poject that Tiggers love the bestest!!! :licka: :licka: :licka:
Fantastic idea and work :worshippy
(make sure you dirty up the engine and stuff ;)
Fantastic idea and work :worshippy
(make sure you dirty up the engine and stuff ;)
Brat_R
01-11-2009, 04:50 PM
I'm not a Ferrari fan but the whole idea and your work is outstanding!!
Keep it up!!
Keep it up!!
da_ashman
01-11-2009, 06:21 PM
Wow, nice project, I can see why its taken 4 years!!!
You should build the Mechanics lying down, that wouldmake for an interesting dirama!!
You should build the Mechanics lying down, that wouldmake for an interesting dirama!!
AustinMartin
01-11-2009, 06:28 PM
Wow!
360spider
01-11-2009, 09:40 PM
Very serious undertaking!
rockinanko
01-12-2009, 12:03 AM
this is definitely the one build that dropped my jaw!
very intelligent usage of other kit parts for the purpose, i take my hats off!
indeed a very bold attempt & time consuming feat...i never see such a project for a while!
all the best & happy modeling!
very intelligent usage of other kit parts for the purpose, i take my hats off!
indeed a very bold attempt & time consuming feat...i never see such a project for a while!
all the best & happy modeling!
mrawl
01-12-2009, 03:43 AM
Great concept and work so far. Hats off to you.
andybmw7272
01-15-2009, 09:32 PM
This looks like a lot of fun. It will be a lot of fun to watch as well.
Keep it up! I like this idea.
Andy
Keep it up! I like this idea.
Andy
odyner
01-16-2009, 05:14 PM
That is a very brave project!!! I'll keep my fingers crossed for you, progress so far is great, I'll be tuned! :runaround:
hpstrehler
07-19-2013, 09:11 AM
Wow!
Has this modell been finished?
Regards
HP
Has this modell been finished?
Regards
HP
sportscars24
07-19-2013, 11:35 AM
@Hanspeter
No not yet, i have made many modells between this. One day when i am in the mood i will finish this one. A lot of work to do because allmost everything is scratch build work.
Regards Roger
No not yet, i have made many modells between this. One day when i am in the mood i will finish this one. A lot of work to do because allmost everything is scratch build work.
Regards Roger
Automotive Network, Inc., Copyright ©2024