Anyone know the tools required to replace the pads and rotors on a 01 clk 320 I have limited tools and need to know what I need to do the job without running to the parts store a million times
Thanks!

The calipers slides are metric 7mm allens if i remember correctly ( I could be wrong) and the bolt that holds the rotor on is a 4 or 5mm allen. The bolts for the caliper bracket are 16mm bolts?? Just get some metric sockets and allens, that will cover it.

Thanks For The Reply Do You Know If You Need To Reinstall The Sensors Or Can You Just Disconnect Them With No Error?

You can leave them off and not have any problems but why. I would recommend reusing the old ones or installing new. It would be a bad deal if you went through another set of pads and started to grind in the rotor before noticing the problem.