Our Community is 940,000 Strong. Join Us.


95 blazer prndl


2percent
12-12-2008, 05:52 PM
My gear indicator light (PRNDL) doesnt work anyone else have this problem? Truck runs fine and all just doesnt light up or work. Anyone know how to fix this?

MT-2500
12-13-2008, 10:30 AM
first thing is to get it on a engine/transmission capable scanner and see of the gear selecter switch is switching good.
If so pull dash and check plugin on back of it.
Lot of problems with the printed circuits in the dash.

Check with dealer and see if yours can be tested and or be rebuilt/repaired.

2percent
01-09-2009, 04:46 PM
OK I am still having this problem I have no access to the scanner and I am currently out of work. So I pulled the cluster and nothing looks broken or burnt. And I cant seem to find power coming into it either.So I figured broken wire.. I would check the wires on the trans but cant seem to trace them without dropping trans. Is the anyway around this??

MT-2500
01-09-2009, 05:23 PM
OK I am still having this problem I have no access to the scanner and I am currently out of work. So I pulled the cluster and nothing looks broken or burnt. And I cant seem to find power coming into it either.So I figured broken wire.. I would check the wires on the trans but cant seem to trace them without dropping trans. Is the anyway around this??


The gear selecter switch is on right side shift lever into transmission.

But you really need a scanner tomsee if it if working.

Factory repair manual or a all data online sub has the wiriging diagrams and test to run on it.

http://www.alldata.com/products/diy/index.html

Add your comment to this topic!