New to the Skyline world...Military in japan and i just got a R32 GTS-4. i got the apex i turbo timer installed with the A/F info and it is running rich..it will loop to .9 at idle..but i do not see the tach or hear the engine running up and down...when the car warms up it will look mor normal readings...and the i am driving it seems to look normal as well..any help.

also where are some other good site to get some info on my new ride...

www.skylinesdownunder.com
www.freshalloy.com
www.gtr.co.uk

A/F meters are not that accurate. The only way to really correct the problem is getting the car re-mapped.

From what you are describing, don't worry about it.

What's your AFSC?

I am a 2E1X2

well the car seems to blow white smoke sometimes when i get on it..and i know the timer gauge is not the most accurate but i know there is a problem..the gas milage is not the best as well..onlt about 250-300K a tank..
2a372 F-16 Avionics

i had a prob with my r32 gtst i was idling at 1300prm!!! pretty bad hey, well it was a glitch in the ecu

Just remember it is better to run too rich then to run too lean.