Our Community is 940,000 Strong. Join Us.


92 s-series exhaust manifold


wraith05
12-04-2008, 11:29 AM
Is there an easy way to adapt the exhaust manifold of a 92 s-series into a 93 sc2 or is it not worth the while and a question on the abs is it normal for the antilock light to come on while the car is running and not go away, when i turn the car it turns on then goes off in about 5 seconds like it has to but after driving a while it comes back and it doesnt go away should i get it check out?

RC1488
12-04-2008, 11:23 PM
The '92 DOHC came with header not a manifold. Its compatible with all DOHC up till '99.

The ABS usually turns on for a few seconds once driving over 5mph then shuts off. If it does not or comes back on, check your axles near the spindle on the inside. Youll see a gear looking metal piece around the axle where the ABS sensor sits. Sometimes these teeth can get junk in them and the sensor wont work right. Another thing is the sensor itself at one of the wheels could be unpluged or have an issue. Check these out before bringing it to anyone.

wraith05
12-05-2008, 01:46 PM
well im gonna have to check that sensor cause when i bought the car the passender side was hit on the fender and i had to replace the shock but the axle was ok maybe the sensor got damaged, thank you

Add your comment to this topic!