Our Community is 940,000 Strong. Join Us.


need some help


roddy718
11-21-2008, 03:54 PM
i just changed out the gaskets in my intake manifold and when i plugged everything back in my fuel gauge and my oil pressure gauge are not reading. They are just pinned on the right side. What should i check and where is it located?

old_master
11-21-2008, 03:58 PM
An open circuit will cause a gauge to read maximum. Look for a connector that didn't get plugged in or a blown fuse.

roddy718
11-21-2008, 04:02 PM
i checked the connectors ill have to recheck the fuses but i believe they were all good aswell i was thinking a possible broken wire in the harness???

old_master
11-21-2008, 04:18 PM
Year, make, and model, and I'll check the wiring schematic for a likely spot to look.

Add your comment to this topic!