Porsche 962
Mihec
10-25-2008, 07:57 AM
http://i278.photobucket.com/albums/kk103/MihecNI/12-12.jpg
It's not F1 but it's pretty quiet the same :D
http://i278.photobucket.com/albums/kk103/MihecNI/11-14.jpg
So, here we have a Revell 962 repacked kit from Hasegawa. But for first I need to got some references:
http://i278.photobucket.com/albums/kk103/MihecNI/13-11.jpg
I replaced original decals with more original Rothmans from LeMans 87':
http://i278.photobucket.com/albums/kk103/MihecNI/14-11.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/15-9.jpg
I need details, so front door was cuted out!
http://i278.photobucket.com/albums/kk103/MihecNI/16-9.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/17-9.jpg
A couple oh holes for antenas, sensor and other stuff:
http://i278.photobucket.com/albums/kk103/MihecNI/18-8.jpg
I need to scthrach built entry to cabin on drivers side:
http://i278.photobucket.com/albums/kk103/MihecNI/19-9.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/20-9.jpg
Original seats in grat but not if you cut out the doors:
Before
http://i278.photobucket.com/albums/kk103/MihecNI/22-7.jpg
After
http://i278.photobucket.com/albums/kk103/MihecNI/21-8.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/23-5.jpg
Dashboard is realy grat detailed. I just need to drill out a couple of hoals for keys and trigers:
http://i278.photobucket.com/albums/kk103/MihecNI/24-6.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/25-6.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/26-5.jpg
I will also made detailed CPU:
http://i278.photobucket.com/albums/kk103/MihecNI/27-6.jpg
And for finishing today modeling day I drill holes for couple of nets in cabin.
http://i278.photobucket.com/albums/kk103/MihecNI/28-5.jpg
That's all folks for today!
It's not F1 but it's pretty quiet the same :D
http://i278.photobucket.com/albums/kk103/MihecNI/11-14.jpg
So, here we have a Revell 962 repacked kit from Hasegawa. But for first I need to got some references:
http://i278.photobucket.com/albums/kk103/MihecNI/13-11.jpg
I replaced original decals with more original Rothmans from LeMans 87':
http://i278.photobucket.com/albums/kk103/MihecNI/14-11.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/15-9.jpg
I need details, so front door was cuted out!
http://i278.photobucket.com/albums/kk103/MihecNI/16-9.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/17-9.jpg
A couple oh holes for antenas, sensor and other stuff:
http://i278.photobucket.com/albums/kk103/MihecNI/18-8.jpg
I need to scthrach built entry to cabin on drivers side:
http://i278.photobucket.com/albums/kk103/MihecNI/19-9.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/20-9.jpg
Original seats in grat but not if you cut out the doors:
Before
http://i278.photobucket.com/albums/kk103/MihecNI/22-7.jpg
After
http://i278.photobucket.com/albums/kk103/MihecNI/21-8.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/23-5.jpg
Dashboard is realy grat detailed. I just need to drill out a couple of hoals for keys and trigers:
http://i278.photobucket.com/albums/kk103/MihecNI/24-6.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/25-6.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/26-5.jpg
I will also made detailed CPU:
http://i278.photobucket.com/albums/kk103/MihecNI/27-6.jpg
And for finishing today modeling day I drill holes for couple of nets in cabin.
http://i278.photobucket.com/albums/kk103/MihecNI/28-5.jpg
That's all folks for today!
ChillyB
10-25-2008, 10:17 AM
If you'd like to check out some reference of this privately owned Le Mans winning 962, you can go to my Photobucket album.
http://img.photobucket.com/albums/v230/ChillyB1/Porsche%20962/166-6605_IMG.jpg
http://img.photobucket.com/albums/v230/ChillyB1/Porsche%20962/166-6615_IMG.jpg
http://img.photobucket.com/albums/v230/ChillyB1/Porsche%20962/166-6632_IMG.jpg
http://smg.photobucket.com/albums/v230/ChillyB1/Porsche%20962/
http://img.photobucket.com/albums/v230/ChillyB1/Porsche%20962/166-6605_IMG.jpg
http://img.photobucket.com/albums/v230/ChillyB1/Porsche%20962/166-6615_IMG.jpg
http://img.photobucket.com/albums/v230/ChillyB1/Porsche%20962/166-6632_IMG.jpg
http://smg.photobucket.com/albums/v230/ChillyB1/Porsche%20962/
Sebastian.
10-25-2008, 10:56 AM
How much I have understood there will be version LeMans? How be going to alter a back tail of the car??
klutz_100
10-25-2008, 12:11 PM
This looks very promising :thumbsup:
Looking forward to following along :)
Looking forward to following along :)
Mihec
10-25-2008, 01:01 PM
I need to corect myselfe. I will not built a LeMans car but a 962 with Rothmans livery. Because Revell kit just don't give me that detail witch I need to built a LeMans car. I saw many picturies of different version 962, now I will just combinate what I could. My goal is a Rothmans scheme of 962 for hm....friday testing:)
DasWiesel
10-26-2008, 04:57 AM
Nice project, i will follow this.
Judging by your photos the blue on Revellīs decals seem to be to dark and on those of Museum Collection(?) too bright.
What would you say?
Judging by your photos the blue on Revellīs decals seem to be to dark and on those of Museum Collection(?) too bright.
What would you say?
Sebastian.
10-26-2008, 08:50 AM
The complete set from Revell represents the version participated in race in Monza 1986. So it too not a bad variant.:)
935k3
10-26-2008, 09:00 AM
I am building this kit also and it is very innacurate. The kit is of an 89 or later 962. The rules were changed in 88 to reduce ground efffects and the top of the ground effects tunnels had to be below the rear axles. There were no Rothman cars past 1987 except maybe one at Fuji that I know of. It would take an extensevie re-work to fix. Alsa the exhaust panel needs to be reworked. Also the rear brake ducts should be removed and the body made level there leaving the hole.
Mihec
03-25-2009, 01:46 PM
Right about a time...
http://i278.photobucket.com/albums/kk103/MihecNI/32-1.jpg
to publish some new staf...
http://i278.photobucket.com/albums/kk103/MihecNI/29-3.jpg
I decided to build Monza 1000km 87' entriy model:
http://i278.photobucket.com/albums/kk103/MihecNI/1-34.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/2-32.jpg
with some extra decals and metal parts:
http://i278.photobucket.com/albums/kk103/MihecNI/41.jpg
bodywork got primered..
http://i278.photobucket.com/albums/kk103/MihecNI/30-3.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/31-1.jpg
I made rear rims covers, because Revell gave me too small rear ones:
http://i278.photobucket.com/albums/kk103/MihecNI/33-1.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/35.jpg
Dashboard:
http://i278.photobucket.com/albums/kk103/MihecNI/36.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/26-5.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/37.jpg
Confort seat:
http://i278.photobucket.com/albums/kk103/MihecNI/38.jpg
Cockpit W.I.P:
http://i278.photobucket.com/albums/kk103/MihecNI/40.jpg
And for the end, a little pr0nography:
http://i278.photobucket.com/albums/kk103/MihecNI/962naked2ps.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/32-1.jpg
to publish some new staf...
http://i278.photobucket.com/albums/kk103/MihecNI/29-3.jpg
I decided to build Monza 1000km 87' entriy model:
http://i278.photobucket.com/albums/kk103/MihecNI/1-34.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/2-32.jpg
with some extra decals and metal parts:
http://i278.photobucket.com/albums/kk103/MihecNI/41.jpg
bodywork got primered..
http://i278.photobucket.com/albums/kk103/MihecNI/30-3.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/31-1.jpg
I made rear rims covers, because Revell gave me too small rear ones:
http://i278.photobucket.com/albums/kk103/MihecNI/33-1.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/35.jpg
Dashboard:
http://i278.photobucket.com/albums/kk103/MihecNI/36.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/26-5.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/37.jpg
Confort seat:
http://i278.photobucket.com/albums/kk103/MihecNI/38.jpg
Cockpit W.I.P:
http://i278.photobucket.com/albums/kk103/MihecNI/40.jpg
And for the end, a little pr0nography:
http://i278.photobucket.com/albums/kk103/MihecNI/962naked2ps.jpg
rollin80s
03-27-2009, 03:58 PM
looks like it's going to turn out great. :thumbsup:
denilsonvm
03-27-2009, 10:27 PM
Very interesting. Nice work in the dash. I'll keep watching.
Denilson
Denilson
klutz_100
03-27-2009, 11:11 PM
Looks great! :thumbsup:
Very good job on the wheel covers and dash. I like your taste in pornography! :D
Very good job on the wheel covers and dash. I like your taste in pornography! :D
Mihec
05-01-2009, 10:47 AM
A little update of 962:
I scratch Interior. Pedals, acumulator, cockpit...:
http://i278.photobucket.com/albums/kk103/MihecNI/43.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/45.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/44.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/46.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/47.jpg
Body has been painted. Cartograf decals are strong and hard to roll them over curves:
http://i278.photobucket.com/albums/kk103/MihecNI/48.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/49.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/50.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/51.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/52.jpg
So far for now...
I scratch Interior. Pedals, acumulator, cockpit...:
http://i278.photobucket.com/albums/kk103/MihecNI/43.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/45.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/44.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/46.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/47.jpg
Body has been painted. Cartograf decals are strong and hard to roll them over curves:
http://i278.photobucket.com/albums/kk103/MihecNI/48.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/49.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/50.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/51.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/52.jpg
So far for now...
sam01contact
05-01-2009, 10:15 PM
That dashboard is absolutely beautiful! You are doing a great job with this model!
Mihec
07-06-2009, 09:22 AM
I made some stuf in middle of LeMans 09':
http://i278.photobucket.com/albums/kk103/MihecNI/53.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/54.jpg
I lost 3 nets because they are so f*cki*ng thiny. I don't have any replacemant rihgt now.
http://i278.photobucket.com/albums/kk103/MihecNI/55.jpg
Fitting parts of model:
http://i278.photobucket.com/albums/kk103/MihecNI/56.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/57.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/58.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/59.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/53.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/54.jpg
I lost 3 nets because they are so f*cki*ng thiny. I don't have any replacemant rihgt now.
http://i278.photobucket.com/albums/kk103/MihecNI/55.jpg
Fitting parts of model:
http://i278.photobucket.com/albums/kk103/MihecNI/56.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/57.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/58.jpg
http://i278.photobucket.com/albums/kk103/MihecNI/59.jpg
guiwee
07-07-2009, 03:41 PM
That is some very good work you got going on.
really like the cockpit and door entryway.
Is door entryway all styrene with battery?
really like the cockpit and door entryway.
Is door entryway all styrene with battery?
Automotive Network, Inc., Copyright ©2024