how do aim the head lights on my 92 GV ? when i bought it had some damage to rt front fender. bumper was and still is pushed back. if i drive 25 mph i out drive the lights left HL shines way to the right RT light is to far right and to low. i see no adjusters as on the old glass head lights. the Chilton manual shows nothing other than the old glass lights.. do i need to remove some trim , grill to get to them ?

Try looking at the OPLIN on line manuals. There's an explanation of how to get them in the thread labeled "Free Online Service Manuals" . Right now it's at the top of the forum.

been there no luck. the chilton manual i have has nothing about how to aim them. i cant see any adjusters.

Aren't those the ones that have the cables that are mounted on top with the torx heads on them?

vertical adjuster corner of fender almost cable style other is top inside of headlight of them

one is inside the head light ???? above the head lights i see two holes in the header p annal looks like two studs that the adjusters for horizontal adj. ?

in top inside corner of headlight that what my books says
one is inside the head light ???? above the head lights i see two holes in the header p annal looks like two studs that the adjusters for horizontal adj. ?

thanks i will need to look better.