BMW Sauber 2006
Zubski
07-14-2008, 05:32 PM
Hello
Well my 1/20 F2000 wasn't ment to be:shakehead So i moved on to something else. This is a Revell 1/24 kit, im really enjoying this kit its really fun and pretty simple. This is going to be a quick build, should be done in a week or so.
I'm still working on the Jordan if you are wondering its just im still:banghead: waiting for stuff to come in, i hope it didn't get lost in the mail:uhoh:
Of what i have done so far i think its as clean as i can get to my ability, and that was my goal with this model.
Anyway here we go.
http://i236.photobucket.com/albums/ff27/Zubski_8/2006bmw-sauber20f1_06.jpg
Front wing is finished.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00376a-9.jpg
Wheels and Tires are finished.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00382a-2.jpg
Suspension is painted, well the front atleast the back just needs one more thing to be painted.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00381a-4.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00383a-4.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/a-1.jpg
I hope you all like it :smile:
:feedback:
Zubski
Well my 1/20 F2000 wasn't ment to be:shakehead So i moved on to something else. This is a Revell 1/24 kit, im really enjoying this kit its really fun and pretty simple. This is going to be a quick build, should be done in a week or so.
I'm still working on the Jordan if you are wondering its just im still:banghead: waiting for stuff to come in, i hope it didn't get lost in the mail:uhoh:
Of what i have done so far i think its as clean as i can get to my ability, and that was my goal with this model.
Anyway here we go.
http://i236.photobucket.com/albums/ff27/Zubski_8/2006bmw-sauber20f1_06.jpg
Front wing is finished.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00376a-9.jpg
Wheels and Tires are finished.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00382a-2.jpg
Suspension is painted, well the front atleast the back just needs one more thing to be painted.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00381a-4.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00383a-4.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/a-1.jpg
I hope you all like it :smile:
:feedback:
Zubski
JTninja
07-15-2008, 01:28 AM
Simple and clean, very nice! Its been tempting to pick up this kit, like the BMW and have yet to do an F1 kit, not a bad place to start. Just wish Revell would have the wheel placement look right...(always seems too wide).
What white is this?
What white is this?
Zubski
07-16-2008, 10:29 AM
Thanks. the white i will use is pure white.
Undertray painted and decaled, engine and suspension is in place.
http://i236.photobucket.com/albums/ff27/Zubski_8/P7160001a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7160002a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7160004a.jpg
Undertray painted and decaled, engine and suspension is in place.
http://i236.photobucket.com/albums/ff27/Zubski_8/P7160001a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7160002a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7160004a.jpg
DerXL
07-16-2008, 03:24 PM
Hi Zubski.
Your progress is looking very promision.
I just love those simple, but beautiful, BMW Saubers.
How did you get "the plank" looking so realistic ?
Was there already a texture in it, or did you do something special to it ?
It looks very convincing !
Your progress is looking very promision.
I just love those simple, but beautiful, BMW Saubers.
How did you get "the plank" looking so realistic ?
Was there already a texture in it, or did you do something special to it ?
It looks very convincing !
Zubski
07-16-2008, 03:36 PM
Was there already a texture in it, or did you do something special to it ?
Thanks DerXL.
There was already texture in it i just painted it. :rofl: I wish i can do that my self.
Thanks DerXL.
There was already texture in it i just painted it. :rofl: I wish i can do that my self.
Zubski
07-18-2008, 08:40 PM
Hello,
I have the rear suspension 100% finished and the front suspension 99% finished. Back wing is finished, also the steering wheel and seat is finished.
http://i236.photobucket.com/albums/ff27/Zubski_8/P7180012a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7180008a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7180009a.jpg
Nearly done now, just waiting for my local hobby shop to get white primer. Next update i will have the car painted so stay tuned!
Zubski
I have the rear suspension 100% finished and the front suspension 99% finished. Back wing is finished, also the steering wheel and seat is finished.
http://i236.photobucket.com/albums/ff27/Zubski_8/P7180012a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7180008a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P7180009a.jpg
Nearly done now, just waiting for my local hobby shop to get white primer. Next update i will have the car painted so stay tuned!
Zubski
billypee
07-29-2008, 03:12 AM
This is turning into a great model for sure and your skills are rapidly improving. :thumbsup:
I learnt the hard way on my FW24 build that if you use grey primer for a white body, that the white doesn't look so white :tongue: so well done for waiting for your LHS.
:2cents: You might consider drilling out the air intake (above the drivers head) if it doesn't create too many problems :2cents:
Kind regards,
Bill
I learnt the hard way on my FW24 build that if you use grey primer for a white body, that the white doesn't look so white :tongue: so well done for waiting for your LHS.
:2cents: You might consider drilling out the air intake (above the drivers head) if it doesn't create too many problems :2cents:
Kind regards,
Bill
Zubski
07-29-2008, 10:55 AM
Thanks billypee. Thats what i thought with the grey primer. I was thinking about drilling it out but im still not sure, i don't want to run into any problems. The only thing i worried about is masking and painting the black, making the hole shouldn't be that hard but i don't know the best way to paint.
Still waiting on the primer but i don't mind becuase im wait for an O-ring for my airbrush.
Still waiting on the primer but i don't mind becuase im wait for an O-ring for my airbrush.
Zubski
08-02-2008, 01:00 PM
Hello
Well the body is painted but i have some bad spots:shakehead . it should be pretty easy to fix, and some spots i don't mind because a decal will go over it.
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020001a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020002a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020005a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020003a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020004a.jpg
Zubski
Well the body is painted but i have some bad spots:shakehead . it should be pretty easy to fix, and some spots i don't mind because a decal will go over it.
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020001a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020002a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020005a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020003a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020004a.jpg
Zubski
Zubski
08-02-2008, 04:37 PM
:grinyes: :grinyes: :grinyes:
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020001a-1.jpg
Coming along!
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020001a-1.jpg
Coming along!
jano11
08-02-2008, 06:21 PM
Look good with decals on! :thumbsup:
Zubski
08-02-2008, 06:47 PM
Look good with decals on! :thumbsup:
:grinyes: i agree! Looks much better with decals on.
:grinyes: i agree! Looks much better with decals on.
DerXL
08-03-2008, 06:10 AM
Hi Zubski
Your BWM Sauber is indeed looking much better with some paint and decals on.
One of the nicest liveries driving around F1 at the moment.
Did you smoothen the paint before applying the decals ?
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020003a.jpg
The paint on the picture above looks very rough.
If you're going to clearcoat the car, the paint underneath the decals has to be as smooth as a mirror (I found out the hard way, even without the roughness of the paint seen in the image above).
Your BWM Sauber is indeed looking much better with some paint and decals on.
One of the nicest liveries driving around F1 at the moment.
Did you smoothen the paint before applying the decals ?
http://i236.photobucket.com/albums/ff27/Zubski_8/P8020003a.jpg
The paint on the picture above looks very rough.
If you're going to clearcoat the car, the paint underneath the decals has to be as smooth as a mirror (I found out the hard way, even without the roughness of the paint seen in the image above).
Zubski
08-03-2008, 09:45 AM
Finished Decaling!
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030001a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030002a.jpg
DerXL I used 2000 grit sandpaper to get it out.
Zubski
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030001a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030002a.jpg
DerXL I used 2000 grit sandpaper to get it out.
Zubski
Zubski
08-03-2008, 05:44 PM
Last Update!
This was i very fun build, i enjoyed it alot. Thank you everyone who viewed and replied.
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030002a-1.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030003a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030005a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030004a.jpg
The instructions say to snap the wheels in place, im hearing snaping but the wheels aren't going on. So instead of breaking the suspension im going to leave them off. I'll make stands for the car and get a piece of wood, router it and the model will stay on that. Looking like this.
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030001a-1.jpg
Zubski
This was i very fun build, i enjoyed it alot. Thank you everyone who viewed and replied.
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030002a-1.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030003a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030005a.jpg
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030004a.jpg
The instructions say to snap the wheels in place, im hearing snaping but the wheels aren't going on. So instead of breaking the suspension im going to leave them off. I'll make stands for the car and get a piece of wood, router it and the model will stay on that. Looking like this.
http://i236.photobucket.com/albums/ff27/Zubski_8/P8030001a-1.jpg
Zubski
Zubski
08-04-2008, 09:37 AM
Automotive Network, Inc., Copyright ©2024