Arta Nsx 2005
karls0415
06-25-2008, 11:05 AM
http://blog.yam.com/karls
歡迎到部落格參觀!
順便幫衝一下人氣!!哈哈!!
拖車環..
http://karl1025.myweb.hinet.net/ARTA/07.JPG
防滾籠.已經補土打磨完成上完色!
http://karl1025.myweb.hinet.net/ARTA/11.JPG
這個顏色質感很優吧!?
http://karl1025.myweb.hinet.net/ARTA/06.JPG
貼上水貼紙,注意輪框上有3張小貼紙,字體很小,別貼反了!
http://karl1025.myweb.hinet.net/ARTA/12.JPG
輪胎的螺絲..
http://karl1025.myweb.hinet.net/ARTA/13.JPG
組合後,輪子部份就完成囉!
http://karl1025.myweb.hinet.net/ARTA/14.JPG
碟煞盤,因為友人沒要求用蝕刻片..所以還是乖乖的分色.用蝕刻的話,質感大增,也方便多了,
不過需要用$$換來!!
http://karl1025.myweb.hinet.net/ARTA/15.JPG
噴上平光黑.
http://karl1025.myweb.hinet.net/ARTA/16.JPG
噴上鐵灰色.
http://karl1025.myweb.hinet.net/ARTA/17.JPG
組合後.
http://karl1025.myweb.hinet.net/ARTA/18.JPG
這些車體雖然本來就是黑色,在裡面也看不到,不過還是一樣要噴上平光黑..
http://karl1025.myweb.hinet.net/ARTA/22.JPG
一樣.
http://karl1025.myweb.hinet.net/ARTA/21.JPG
再來
http://karl1025.myweb.hinet.net/ARTA/19.JPG
再來.
http://karl1025.myweb.hinet.net/ARTA/20.JPG
這個到底是什麼東東?在駕駛室一邊放一個,是滅火器嗎?有沒有人可以解釋一下!!
http://karl1025.myweb.hinet.net/ARTA/24.JPG
這個玩意我也不知道,不要怪我!沒開過賽車嘛> <
http://karl1025.myweb.hinet.net/ARTA/23.JPG
這個我就知道了.哈哈!!噴上平光黑,按鈕依說明書點上各顏色的漆.
http://karl1025.myweb.hinet.net/ARTA/26.JPG
駕駛室.
http://karl1025.myweb.hinet.net/ARTA/25.JPG
賽車座椅噴上一點點類似毛茸感覺!
http://karl1025.myweb.hinet.net/ARTA/281.JPG
號碼牌.
http://karl1025.myweb.hinet.net/ARTA/27.JPG
駕駛室裡面的零件,噴上平光黑.
http://karl1025.myweb.hinet.net/ARTA/29.JPG
組合後.
http://karl1025.myweb.hinet.net/ARTA/28.JPG
駕駛室特寫1
http://karl1025.myweb.hinet.net/ARTA/30.JPG
駕駛室特寫2
http://karl1025.myweb.hinet.net/ARTA/31.JPG
進氣口組合補土.
http://karl1025.myweb.hinet.net/ARTA/33.JPG
車殼鑽1mm孔,裝天線用的.
http://karl1025.myweb.hinet.net/ARTA/32.JPG
車殼的一部份.
http://karl1025.myweb.hinet.net/ARTA/34.JPG
裝上去後用瞬間膠加爽身粉補土.然後用沙紙打磨.
http://karl1025.myweb.hinet.net/ARTA/35.JPG
全身用1000#的水補土噴過,當然這之前經過了很多打磨修補,
http://karl1025.myweb.hinet.net/ARTA/36.JPG
中間引擎蓋部份噴上亮白,不需要做遮蓋.
http://karl1025.myweb.hinet.net/ARTA/37.JPG
噴完後做遮蓋,準備噴車體
http://karl1025.myweb.hinet.net/ARTA/38.JPG
這次遇到最大的困難就是,被TAMIYA呼?了,TS-36根本就噴不出實車的感覺,所以
自己慢慢調顏色..
http://karl1025.myweb.hinet.net/ARTA/39.JPG
尾翼..
http://karl1025.myweb.hinet.net/ARTA/40.JPG
貼上貼紙後.
http://karl1025.myweb.hinet.net/ARTA/41.JPG
尾翼側邊貼紙.
http://karl1025.myweb.hinet.net/ARTA/42.JPG
完成後.
http://karl1025.myweb.hinet.net/ARTA/43.JPG
車體...
http://karl1025.myweb.hinet.net/ARTA/44.JPG
接著遮蓋噴車門黑框,是亮黑色,所以可以一起噴.
http://karl1025.myweb.hinet.net/ARTA/45.JPG
噴後.
http://karl1025.myweb.hinet.net/ARTA/46.JPG
最後撕開後的樣子..大致上的分色完成90%,剩後玻璃因為是平光,所以最後再處理.
http://karl1025.myweb.hinet.net/ARTA/47.JPG
再來就是貼水貼了,搬上這兩樣法寶.
http://karl1025.myweb.hinet.net/ARTA/48.JPG
經過了漫長的幾個夜晚的廝殺.終於完成了,
http://karl1025.myweb.hinet.net/ARTA/49.JPG
這台車在賽車中,看起來也沒特別的花俏,怎麼感覺小貼紙很多= . =
http://karl1025.myweb.hinet.net/ARTA/50.JPG
http://karl1025.myweb.hinet.net/ARTA/51.JPG
車殼拋光處理劑使用了10種之多法寶.
http://karl1025.myweb.hinet.net/ARTA/52.JPG
光澤魔術師.
http://karl1025.myweb.hinet.net/ARTA/53.JPG
為了方法拋光,後照鏡分別處理.
http://karl1025.myweb.hinet.net/ARTA/54.JPG
這個也一樣..
http://karl1025.myweb.hinet.net/ARTA/55.JPG
光澤魔術師.
http://karl1025.myweb.hinet.net/ARTA/56.JPG
光澤魔術師.
http://karl1025.myweb.hinet.net/ARTA/57.JPG
遮掩,準備噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/58.JPG
噴完後..
http://karl1025.myweb.hinet.net/ARTA/59.JPG
雨刷.
http://karl1025.myweb.hinet.net/ARTA/60.JPG
黏玻璃使用這個.
http://karl1025.myweb.hinet.net/ARTA/61.JPG
玻璃完成照.
http://karl1025.myweb.hinet.net/ARTA/62.JPG
遮掩,準備噴紅色
http://karl1025.myweb.hinet.net/ARTA/63.JPG
噴完後
http://karl1025.myweb.hinet.net/ARTA/64.JPG
這個改噴螢光橘效果會比較好.
http://karl1025.myweb.hinet.net/ARTA/65.JPG
完成照.
http://karl1025.myweb.hinet.net/ARTA/66.JPG
噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/67.JPG
捨去tamiya附的黑網,改用金屬網.
http://karl1025.myweb.hinet.net/ARTA/68.JPG
裁出形狀.
http://karl1025.myweb.hinet.net/ARTA/69.JPG
裝上後效果很滿意.
http://karl1025.myweb.hinet.net/ARTA/70.JPG
進氣孔,噴上平光黑,貼上水貼.
http://karl1025.myweb.hinet.net/ARTA/71.JPG
噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/72.JPG
標誌部份噴紅色
http://karl1025.myweb.hinet.net/ARTA/73.JPG
底盤做無縫處理
http://karl1025.myweb.hinet.net/ARTA/74.JPG
噴上金屬藍.
http://karl1025.myweb.hinet.net/ARTA/75.JPG
噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/76.JPG
http://karl1025.myweb.hinet.net/ARTA/77.JPG
http://karl1025.myweb.hinet.net/ARTA/78.JPG
http://karl1025.myweb.hinet.net/ARTA/80.JPG
http://karl1025.myweb.hinet.net/ARTA/81.JPG
天線部份切斷改用細金屬針.
http://karl1025.myweb.hinet.net/ARTA/79.JPG
完成照
http://karl1025.myweb.hinet.net/ARTA/82.JPG
http://karl1025.myweb.hinet.net/ARTA/83.JPG
http://karl1025.myweb.hinet.net/ARTA/84.JPG
http://karl1025.myweb.hinet.net/ARTA/85.JPG
http://blog.yam.com/karls
歡迎到部落格參觀!
順便幫衝一下人氣!!哈哈!!
拖車環..
http://karl1025.myweb.hinet.net/ARTA/07.JPG
防滾籠.已經補土打磨完成上完色!
http://karl1025.myweb.hinet.net/ARTA/11.JPG
這個顏色質感很優吧!?
http://karl1025.myweb.hinet.net/ARTA/06.JPG
貼上水貼紙,注意輪框上有3張小貼紙,字體很小,別貼反了!
http://karl1025.myweb.hinet.net/ARTA/12.JPG
輪胎的螺絲..
http://karl1025.myweb.hinet.net/ARTA/13.JPG
組合後,輪子部份就完成囉!
http://karl1025.myweb.hinet.net/ARTA/14.JPG
碟煞盤,因為友人沒要求用蝕刻片..所以還是乖乖的分色.用蝕刻的話,質感大增,也方便多了,
不過需要用$$換來!!
http://karl1025.myweb.hinet.net/ARTA/15.JPG
噴上平光黑.
http://karl1025.myweb.hinet.net/ARTA/16.JPG
噴上鐵灰色.
http://karl1025.myweb.hinet.net/ARTA/17.JPG
組合後.
http://karl1025.myweb.hinet.net/ARTA/18.JPG
這些車體雖然本來就是黑色,在裡面也看不到,不過還是一樣要噴上平光黑..
http://karl1025.myweb.hinet.net/ARTA/22.JPG
一樣.
http://karl1025.myweb.hinet.net/ARTA/21.JPG
再來
http://karl1025.myweb.hinet.net/ARTA/19.JPG
再來.
http://karl1025.myweb.hinet.net/ARTA/20.JPG
這個到底是什麼東東?在駕駛室一邊放一個,是滅火器嗎?有沒有人可以解釋一下!!
http://karl1025.myweb.hinet.net/ARTA/24.JPG
這個玩意我也不知道,不要怪我!沒開過賽車嘛> <
http://karl1025.myweb.hinet.net/ARTA/23.JPG
這個我就知道了.哈哈!!噴上平光黑,按鈕依說明書點上各顏色的漆.
http://karl1025.myweb.hinet.net/ARTA/26.JPG
駕駛室.
http://karl1025.myweb.hinet.net/ARTA/25.JPG
賽車座椅噴上一點點類似毛茸感覺!
http://karl1025.myweb.hinet.net/ARTA/281.JPG
號碼牌.
http://karl1025.myweb.hinet.net/ARTA/27.JPG
駕駛室裡面的零件,噴上平光黑.
http://karl1025.myweb.hinet.net/ARTA/29.JPG
組合後.
http://karl1025.myweb.hinet.net/ARTA/28.JPG
駕駛室特寫1
http://karl1025.myweb.hinet.net/ARTA/30.JPG
駕駛室特寫2
http://karl1025.myweb.hinet.net/ARTA/31.JPG
進氣口組合補土.
http://karl1025.myweb.hinet.net/ARTA/33.JPG
車殼鑽1mm孔,裝天線用的.
http://karl1025.myweb.hinet.net/ARTA/32.JPG
車殼的一部份.
http://karl1025.myweb.hinet.net/ARTA/34.JPG
裝上去後用瞬間膠加爽身粉補土.然後用沙紙打磨.
http://karl1025.myweb.hinet.net/ARTA/35.JPG
全身用1000#的水補土噴過,當然這之前經過了很多打磨修補,
http://karl1025.myweb.hinet.net/ARTA/36.JPG
中間引擎蓋部份噴上亮白,不需要做遮蓋.
http://karl1025.myweb.hinet.net/ARTA/37.JPG
噴完後做遮蓋,準備噴車體
http://karl1025.myweb.hinet.net/ARTA/38.JPG
這次遇到最大的困難就是,被TAMIYA呼?了,TS-36根本就噴不出實車的感覺,所以
自己慢慢調顏色..
http://karl1025.myweb.hinet.net/ARTA/39.JPG
尾翼..
http://karl1025.myweb.hinet.net/ARTA/40.JPG
貼上貼紙後.
http://karl1025.myweb.hinet.net/ARTA/41.JPG
尾翼側邊貼紙.
http://karl1025.myweb.hinet.net/ARTA/42.JPG
完成後.
http://karl1025.myweb.hinet.net/ARTA/43.JPG
車體...
http://karl1025.myweb.hinet.net/ARTA/44.JPG
接著遮蓋噴車門黑框,是亮黑色,所以可以一起噴.
http://karl1025.myweb.hinet.net/ARTA/45.JPG
噴後.
http://karl1025.myweb.hinet.net/ARTA/46.JPG
最後撕開後的樣子..大致上的分色完成90%,剩後玻璃因為是平光,所以最後再處理.
http://karl1025.myweb.hinet.net/ARTA/47.JPG
再來就是貼水貼了,搬上這兩樣法寶.
http://karl1025.myweb.hinet.net/ARTA/48.JPG
經過了漫長的幾個夜晚的廝殺.終於完成了,
http://karl1025.myweb.hinet.net/ARTA/49.JPG
這台車在賽車中,看起來也沒特別的花俏,怎麼感覺小貼紙很多= . =
http://karl1025.myweb.hinet.net/ARTA/50.JPG
http://karl1025.myweb.hinet.net/ARTA/51.JPG
車殼拋光處理劑使用了10種之多法寶.
http://karl1025.myweb.hinet.net/ARTA/52.JPG
光澤魔術師.
http://karl1025.myweb.hinet.net/ARTA/53.JPG
為了方法拋光,後照鏡分別處理.
http://karl1025.myweb.hinet.net/ARTA/54.JPG
這個也一樣..
http://karl1025.myweb.hinet.net/ARTA/55.JPG
光澤魔術師.
http://karl1025.myweb.hinet.net/ARTA/56.JPG
光澤魔術師.
http://karl1025.myweb.hinet.net/ARTA/57.JPG
遮掩,準備噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/58.JPG
噴完後..
http://karl1025.myweb.hinet.net/ARTA/59.JPG
雨刷.
http://karl1025.myweb.hinet.net/ARTA/60.JPG
黏玻璃使用這個.
http://karl1025.myweb.hinet.net/ARTA/61.JPG
玻璃完成照.
http://karl1025.myweb.hinet.net/ARTA/62.JPG
遮掩,準備噴紅色
http://karl1025.myweb.hinet.net/ARTA/63.JPG
噴完後
http://karl1025.myweb.hinet.net/ARTA/64.JPG
這個改噴螢光橘效果會比較好.
http://karl1025.myweb.hinet.net/ARTA/65.JPG
完成照.
http://karl1025.myweb.hinet.net/ARTA/66.JPG
噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/67.JPG
捨去tamiya附的黑網,改用金屬網.
http://karl1025.myweb.hinet.net/ARTA/68.JPG
裁出形狀.
http://karl1025.myweb.hinet.net/ARTA/69.JPG
裝上後效果很滿意.
http://karl1025.myweb.hinet.net/ARTA/70.JPG
進氣孔,噴上平光黑,貼上水貼.
http://karl1025.myweb.hinet.net/ARTA/71.JPG
噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/72.JPG
標誌部份噴紅色
http://karl1025.myweb.hinet.net/ARTA/73.JPG
底盤做無縫處理
http://karl1025.myweb.hinet.net/ARTA/74.JPG
噴上金屬藍.
http://karl1025.myweb.hinet.net/ARTA/75.JPG
噴平光黑.
http://karl1025.myweb.hinet.net/ARTA/76.JPG
http://karl1025.myweb.hinet.net/ARTA/77.JPG
http://karl1025.myweb.hinet.net/ARTA/78.JPG
http://karl1025.myweb.hinet.net/ARTA/80.JPG
http://karl1025.myweb.hinet.net/ARTA/81.JPG
天線部份切斷改用細金屬針.
http://karl1025.myweb.hinet.net/ARTA/79.JPG
完成照
http://karl1025.myweb.hinet.net/ARTA/82.JPG
http://karl1025.myweb.hinet.net/ARTA/83.JPG
http://karl1025.myweb.hinet.net/ARTA/84.JPG
http://karl1025.myweb.hinet.net/ARTA/85.JPG
http://blog.yam.com/karls
cyberkid
06-25-2008, 12:15 PM
哇~難得一見的台灣人....
作的粉漂亮捏....
阿 在這個論壇有幾個要點:
1. 貼對地方: 像你這篇應該貼於"completed models" (完成模型)那邊
2. 即使英文粉破...盡量用英文...這樣才能讓大家充分欣賞 你的傑作 ... 看有沒有力氣翻一下你的第一篇...
看到你的研磨膏我都傻掉了...你用哪10種阿@_@? 透露一下咩..
I've asked Karls to edit the post into Eng...
Its nice to see a fellow Taiwanese here :runaround:
Or you could try this...: here (http://translate.google.com/translate?u=http%3A%2F%2Fwww.automotiveforums.com% 2Fvbulletin%2Fshowthread.php%3Ft%3D909773&sl=zh-CN&tl=en&hl=zh-TW&ie=UTF-8)
Steve
作的粉漂亮捏....
阿 在這個論壇有幾個要點:
1. 貼對地方: 像你這篇應該貼於"completed models" (完成模型)那邊
2. 即使英文粉破...盡量用英文...這樣才能讓大家充分欣賞 你的傑作 ... 看有沒有力氣翻一下你的第一篇...
看到你的研磨膏我都傻掉了...你用哪10種阿@_@? 透露一下咩..
I've asked Karls to edit the post into Eng...
Its nice to see a fellow Taiwanese here :runaround:
Or you could try this...: here (http://translate.google.com/translate?u=http%3A%2F%2Fwww.automotiveforums.com% 2Fvbulletin%2Fshowthread.php%3Ft%3D909773&sl=zh-CN&tl=en&hl=zh-TW&ie=UTF-8)
Steve
davezilla
06-25-2008, 06:11 PM
Welcome to AF. Your NSX looks great, very nice paint job. Also an excellent tutorial. :)
karls0415
06-26-2008, 06:45 AM
哇~難得一見的台灣人....
作的粉漂亮捏....
阿 在這個論壇有幾個要點:
1. 貼對地方: 像你這篇應該貼於"completed models" (完成模型)那邊
2. 即使英文粉破...盡量用英文...這樣才能讓大家充分欣賞 你的傑作 ... 看有沒有力氣翻一下你的第一篇...
看到你的研磨膏我都傻掉了...你用哪10種阿@_@? 透露一下咩..
I've asked Karls to edit the post into Eng...
Its nice to see a fellow Taiwanese here :runaround:
Or you could try this...: here (http://translate.google.com/translate?u=http%3A%2F%2Fwww.automotiveforums.com% 2Fvbulletin%2Fshowthread.php%3Ft%3D909773&sl=zh-CN&tl=en&hl=zh-TW&ie=UTF-8)
Steve
瞭解,下次我會發對地方,謝啦~
英文被你料中,實在破到不行.沒辦法翻@@
研磨照片中有7瓶 +一瓶3m的蠟 +一瓶TAMIYA的水蠟 +一瓶氟素鈦
等於10瓶,在這一直打中文感覺有點怪怪的,有機會來我的部落格聊聊!
作的粉漂亮捏....
阿 在這個論壇有幾個要點:
1. 貼對地方: 像你這篇應該貼於"completed models" (完成模型)那邊
2. 即使英文粉破...盡量用英文...這樣才能讓大家充分欣賞 你的傑作 ... 看有沒有力氣翻一下你的第一篇...
看到你的研磨膏我都傻掉了...你用哪10種阿@_@? 透露一下咩..
I've asked Karls to edit the post into Eng...
Its nice to see a fellow Taiwanese here :runaround:
Or you could try this...: here (http://translate.google.com/translate?u=http%3A%2F%2Fwww.automotiveforums.com% 2Fvbulletin%2Fshowthread.php%3Ft%3D909773&sl=zh-CN&tl=en&hl=zh-TW&ie=UTF-8)
Steve
瞭解,下次我會發對地方,謝啦~
英文被你料中,實在破到不行.沒辦法翻@@
研磨照片中有7瓶 +一瓶3m的蠟 +一瓶TAMIYA的水蠟 +一瓶氟素鈦
等於10瓶,在這一直打中文感覺有點怪怪的,有機會來我的部落格聊聊!
karls0415
06-26-2008, 06:52 AM
Welcome to AF. Your NSX looks great, very nice paint job. Also an excellent tutorial. :)
Thanks
Your car too make very good
My English not good
Can hope you look understand!
Frees can come my website takes a stroll
:evillol:
Thanks
Your car too make very good
My English not good
Can hope you look understand!
Frees can come my website takes a stroll
:evillol:
Martbee
06-26-2008, 10:36 AM
I hope you understand the word "Cool work !".
sileightsix
07-01-2008, 12:34 AM
wow, what a treat!
Amazing play by play.
Only thing, offset might warrant a little attention. Ya know, only because the masking and painting AND polishing are all very refined.
Give this car a stance. :smokin:
Amazing play by play.
Only thing, offset might warrant a little attention. Ya know, only because the masking and painting AND polishing are all very refined.
Give this car a stance. :smokin:
Automotive Network, Inc., Copyright ©2024