22RE with MegaSquirt

Hello Guys i need help.
i want to install a MegaSquirt ECU To my 22RE
and i need help for identifie IGT and NE signal in the Ignter Module
for Connect The ECu

some body can help i have pic of inside of the igniter Modulehttp://memimage.cardomain.com/member_images/11/web/2975000-2975999/2975227_53_full.jpg

According to a diagram I have the IGT wire should be blk w/a white stripe and the NE should be blk w/a red stripe.

Also, those colors would typically be the harness side. Wires on a modules "pig tail" may not be the same.

ok, if you see the connector between the Igniter module and the Wiring Harnes and see what color is connect to the IGT and NE signal
in the igniter module side ?

for example

According to a diagram I have the IGT wire should be blk w/a white stripe and the NE should be blk w/a red stripe.

the IGT BLK w/a White Stripe is connect to Blue Wire in the module
and the NE blk w/a Red sctrip is connect to Green cable in the module?

can this help
?

thanks guys i buy a truck with out engine and wiring harnes
i buy a kit MegaSquirt and i installed but i need find the NE and IGT signal from the igniter..
only have the igniter tnks