Power window motor replacement
morgantabby
06-06-2008, 09:03 PM
How do you replace the motor?
It is pop-rivitted together. Drill them out?
And add screws to secure everyting?
Thanks for any info!!
It is pop-rivitted together. Drill them out?
And add screws to secure everyting?
Thanks for any info!!
inafogg
06-06-2008, 10:33 PM
Hello morgan,yes they use rivits drill them out & rerivit or bolt.should'nt be to difficult to remove inside door panel you dont say fr./rear but either way...
morgantabby
06-07-2008, 06:53 AM
Sorry for lack of info.
It is the passenger side door.
I drilled the rivitts out. but there is a large spring with a lot tension on it. I'm having an extermly difficult time trying to get it all lined up.
Is there some trick to this? I can get one hole to line up , but can't get the rest to pivot on it to line up.
Any suggestions??????
Thanks for your input.
It is the passenger side door.
I drilled the rivitts out. but there is a large spring with a lot tension on it. I'm having an extermly difficult time trying to get it all lined up.
Is there some trick to this? I can get one hole to line up , but can't get the rest to pivot on it to line up.
Any suggestions??????
Thanks for your input.
Automotive Network, Inc., Copyright ©2024