97 4.3 firing order
bluebuick91
05-11-2008, 09:35 PM
hi i pulled my #1 plug got it up on the compression stroke pulled cap and the rotter is facing #4 opposite of the #1 is that right.
it runs good sitting but no power at all just a bog and just checking everything.put a new coil,cap,rotter,wires,plugs,fuel filter,ignition switch,.
and my code reader only pulls up codes 300 305 306 missfires nothing else
thanks for any help
it runs good sitting but no power at all just a bog and just checking everything.put a new coil,cap,rotter,wires,plugs,fuel filter,ignition switch,.
and my code reader only pulls up codes 300 305 306 missfires nothing else
thanks for any help
old_master
05-11-2008, 09:48 PM
Passenger side, front of cap to rear: 2, 4, 6.
Driver side, front of cap to rear: 3, 1, 5.
P0300 is random cylinder misfire.
P0305 is a misfire on cylinder #5.
P0306 is a misfire on cylinder #6.
Driver side, front of cap to rear: 3, 1, 5.
P0300 is random cylinder misfire.
P0305 is a misfire on cylinder #5.
P0306 is a misfire on cylinder #6.
MT-2500
05-12-2008, 08:10 AM
If the new flat top dist cap the firing order is marked on the cap.
To set the dist/or rotor.
http://files.automotiveforums.com/gallery/showphoto.php?photo=51302
To set the dist/or rotor.
http://files.automotiveforums.com/gallery/showphoto.php?photo=51302
Automotive Network, Inc., Copyright ©2024