WIP Tamiya 1/20 Benetton Ford B192

Hey

I have been working on the B192 for a couple of weeks now and thought i would share it with you. Well here we go.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00280a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00274a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00276a-1.jpg

The engine is almost done. I primed most of the parts, and the cowl is painted.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00313a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00315a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00316a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00317a.jpg

More Progress.

Painted the wings. The back wing still needs the black.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00315a-1.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00316a-1.jpg

I don't know why the pictures are so bad. I'll have better ones for you next update.

I didn't thing it was that bad. Anytips on what im doing wrong?

Just seen your thread.Nice start.The engine painting looks very neat, although the photos are a little dark to see it properly.

what'is the ref of your color?

Hey

Thanks guys for the replys.

greg-ory: I used Camel Yellow TS34 and Park Green TS35, i believe thats what you asked lol.

Update:

I decaled some of the front wing. I am not good at decaling at all, still new to improve on it alot.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00316a-2.jpg

I should be finished the wing this week, and then ill do the back wing.

Zubski

Hey

Thanks guys for the replys.

greg-ory: I used Camel Yellow TS34 and Park Green TS35, i believe thats what you asked lol.

Update:

I decaled some of the front wing. I am not good at decaling at all, still new to improve on it alot.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00316a-2.jpg

I should be finished the wing this week, and then ill do the back wing.

Zubski

thx!

Hey,

Did some more! I did the front tires, more of the wing, painted the exuast, started the seat, and painted the undertray. I am really happy with what i have done so far.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00315a-2.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00317a-1.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00319a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00321a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00322a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00323a.jpg


Hope you Like, and thanks for looking.

Zubski

Looking very nice especially the wing.I know from experience that those yellow decals around the wheels can be tricky but yours are looking good, nice work!!

Looking very nice especially the wing.I know from experience that those yellow decals around the wheels can be tricky but yours are looking good, nice work!!

Thanks Steve. Yes i found them really challenging, I'm afraid to but them on the back:shakehead .

Thanks Steve. Yes i found them really challenging, I'm afraid to but them on the back:shakehead .

Well if they turn out as good as the fronts don't be afraid.I found that if you trim a little of the carrier film away and slightly shorten the length of the yellow part a bit so there is less overlap, they are a little easier to apply.I also used very small quantities of Mr Mark Softer to help them to conform to the curve better.

Well if they turn out as good as the fronts don't be afraid.I found that if you trim a little of the carrier film away and slightly shorten the length of the yellow part a bit so there is less overlap, they are a little easier to apply.I also used very small quantities of Mr Mark Softer to help them to conform to the curve better.The easiest way I've found to doing this is to trim all the carrier film and cut the decals into 3 or 4 equal length pieces.

yea thats an easy way to do the rim, also with a little more pratice you can become very good :D Its looking excellent i more progress please!

Hey,

Thanks everyone.

Small Update:


I finished the back wheel. I think they came out better then the front. What i did was cut them in half then put the O.Z. Racing over the over laped layer.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00317a-2.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00318a.jpg

I forget what this is called, but i finished it. It was simple black paint and decal didnt take me long to do.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00317a-3.jpg

Thanks For looking

Zubski

Hey

Thanks for the replys.

Update:

I did alot of painting this weekend. Painted the black on the back wing, clear coated the front, the black inside the car, and the yellow on a bunch of parts. The engine is also finally in and i attached the back wheels too.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00326a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00327a.jpg

This is a picture of the wing with my Ferrari F2000 1/43 back wing.
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00328a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00330a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00332a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00333a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00334a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00335a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00336a.jpg

Thanks for looking

Zubski

Looks great, it looks like your almsot done! keep them coming.

Hey

Small Update:

Started decaling the back wing. The front Camel came out really good i think, i thought i would mess it up when cutting it.
The back camel ripped and i ended up wrecking the A.

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00332-1a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00333-1a.jpg

:'( and disaster...
http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00335-1a.jpg

Thanks for looking

Zubski

Still looking good.Don't worry about the Camel logo, I did exactly the same thing with mine!!! They are a bit tricky to apply.

Hello,

Thanks Steve.

Update:

100% finished the front and back wing.

Front wing...

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00332a-1.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00338a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00333a-1.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00335a-1.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00334a-1.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00337a.jpg


Back wing...

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00339a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00340a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00341a.jpg

http://i236.photobucket.com/albums/ff27/Zubski_8/DSC00342a.jpg

Thanks for looking

Zubski

Very nice.
I love the B192. I have a few to make as well. One is an extreme kit I am part way through.

Very nice.
I love the B192. I have a few to make as well. One is an extreme kit I am part way through.

Nice, will you be posting a WIP? It would be really interesting to see an extreme B192 in progress.

Zubski

PM me your email and I will send you pics of what I have done so far.
Basically lots of scratchbuilding. Front suspension, rear suspension, brakes, new endplates, thinned everything, engine tray and intake trumpets.

:cheers:
Nenad

Finished:D Thank you everybody. Finished pics will be up tonight.

Lookin' good so far.