|
|
Steps for Performance & Elimination of Rough IdleBalcome 04-17-2008, 09:59 PM #1 Clean the throttle body and clean / replace PCV valve #2 Eliminate the egr valve, make custom gaskets and plate with steel #3 Cold air intake w/K+N filter #4 Eliminate Catillatic Converter / Remove Platnium from it #5 Straight pipe from the cat to a high flow muffler, eliminating two of the resignators #6 Clean valves of carbon, the 6G73 engine will carbon up if running 87 octane gas, depending on the buildup u could have to take off the heads, or be as simple as running some supreme with injector cleaner #7 Change the oil regularly #8 Check the spark of the wires using a gapping tool to be sure the sparkplug is getting good power, Use dielectic grease on both ends of the wire and make sure you are using platnium spark plugs #9 Change the rotor button, and inspect the distributor cap for cracks #10 Convert the car to a manual transmission, Mercury cougar as well as 5-spd sebrings will fit with limited modifications vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|