2004 Chevrolet Malibu Trunk Release Button

I just bought a 2004 Malibu less that a month ago. A few days ago both the keychain, and the door release button stop working. It makes a clicking sound when pressing both, but the trunk won't open. However, it still work with the key by itself.
I've checked both fuse boxes, and nothing is preventing it from opening. I can't put my hands on it. The dealer wants to charge $90.00 just to look at it. The 30 days warranty is a powertrain warranty, and don't cover this problem. Any suggestions?

sounds like it is trying to release- it is just out of adjustment- or needs oiled-- open the trunk and observe the release actuator- see if it is sluggish or binding- or corroded...........

I had the same problem. This is what I found. The key fob and trunk release buttons only send out a short pulse no matter how long you hold them down. I found the trunk release relay was sluggish.

In your owners manual look on page 5-94. The trunk release relay is shown as relay #36. Mark that relay with a marker so that you do not get them mixed up and then, swap it with a similar relay on the panel. Just confirm that they are the same part number. With luck the relay now in the trunk position will have a quicker response time and your trunk will open.

If you don't have the owners manual on hand, open the trunk with the key and go to the fuse panel on the left hand side. Click the key fob trunk open button and feel with your hand which relay is clicking. That is relay #36.

My daughter's 04 Malibu had the same problem - my husband just ordered the release actuator from the dealer - seems like it was about $60 - fixed the problem.

The problem as I see it is that the electrical pulse from the trunk release button is too short so that any sluggishness in the mechanical system could also cause problems. So it could be the actuator or the relay. I presume that the electrical pulse length is determined by the Body Control Module. GM should look into making it longer.

Thanks for the info. I had the same problem, where the trunk button made a click sound, and even moved the lock a little, but didn't release the trunk. Swapped the relay, and it has a louder click, and opens the trunk. Easy fix. :)

Thanks for the info. I had the same problem, where the trunk button made a click sound, and even moved the lock a little, but didn't release the trunk. Swapped the relay, and it has a louder click, and opens the trunk. Easy fix. :)

So I'm hoping my problem is same. Where did u get the relay from?

More often than not, it's the actuator in the trunk......

So I'm hoping my problem is same. Where did u get the relay from?

I just searched the web and came up with this for $6.
http://www.ebay.com/itm/261440470782?item=261440470782&viewitem=&sspagename=ADME:L:OU:US:1120&vxp=mtr

8866 OEM RELAY 4 PIN CHEVY MALIBU

Before you buy it, swap the trunk relay with another one in the fuse box, just to make sure the relay is the problem. Good luck!

This is how I got into my 2004 Chevy Malibu after my fob, key or trunk release didn't work. I took a screw driver attached a pair of vise grips to the handle for some leverage and carefully twisted the lock back and forth until the trunk lock was dislodged from the clip and make sure I didn't damage the lock hole. I removed the screw driver and detached the linkage from the back of the lock and removed the lock. If you can hold onto the linkage great. You'll be able to pull it slightly to the right and open the trunk. If you dropped the linkage inside the hole like I did, I took a 4" mini paint roller handle and inserted the tip into the hole and fished the linkage up until I could touch it with the tip of my finger. Slide it to the side and the trunk will open.