Our Community is 940,000 Strong. Join Us.


Wold WR1 (thru WR4) brake system question.


Emilio Lizardo
03-26-2008, 08:57 AM
I am working on the 1/12 Wolf WR1. I am planning out the brake lines in the rear. Based on my reseach, the lines appear to go back from the master cylinder to the rear bulkhead on the left side of the car and to a filter/pump device onthe bulkhead included on the kit and then to a device that looks like 'dumb bell' also on the side. The instructions do not describe the parts as they function ont he real item.

Are these parts of the brake system. It appears from all of the photos that the aeroquip lines go from here, under the engine to the left rear caliper with a second line going under the gear box to the left caliper. Nice photo in a recent Motorsport of the underside of a Lotus 78 showing the line under the geabox.

I do not have attachment priviledges or I would show the photo from the instructions and the parts from same.

I also still working out the path of the clutch line which appears to go into a gusset in the left of the front bulkhead. Where it comes out and attaches to the cluch 'slave' cylinder, I am still looking for.

Add your comment to this topic!