90 eclipse 2.0 turbo 5sp rebuild problem
03impala9c1
03-16-2008, 09:59 PM
90 eclipse 5sp turbo 2.0 dohc problem
had a detonated piston number 3 i believe, so the engine was torn down block removed, rebuilt and thrown back together... brand new battery cranked over fine before hand
went to turn it over and it JUST started to crank then... POP! then nothing... now theres like no power anywhere it seems... until... i disconnect the power wire then wait a little while then reconnect it and accessories go goofy sort of but still no cranking at al or even a soleniod click for that matter... sometimes it will pop again sometimes it wont i removed the power wire again and tried to get a spark out of it between the post and terminal and dont see anything whatsoever... WTH?!?!
had a detonated piston number 3 i believe, so the engine was torn down block removed, rebuilt and thrown back together... brand new battery cranked over fine before hand
went to turn it over and it JUST started to crank then... POP! then nothing... now theres like no power anywhere it seems... until... i disconnect the power wire then wait a little while then reconnect it and accessories go goofy sort of but still no cranking at al or even a soleniod click for that matter... sometimes it will pop again sometimes it wont i removed the power wire again and tried to get a spark out of it between the post and terminal and dont see anything whatsoever... WTH?!?!
Automotive Network, Inc., Copyright ©2024