I'm getting trouble codes 0171,0174 bank1 and bank2 too lean. I just did a complete tune-up on it and also pulled the trottle body and cleaned the EGR
ports to clear the 04901 code. This worked!!! I also went ahead and changed
the EGR valve, EGR sensor,and the EGR solenoid for good measure. I can't figure why now im getting the bank1,2 codes. Anyone had this same problem?

Youve got a vacuum leak now. I'd check around the TB first.

You did buy new TB and EGR gaskets right?

I didn't buy a new TB but I did get a new EGR gasket. I did how ever find a posible vacum leak were the main vacum line plugs into the pcv valve. The conector that locks the vacum line to the valve is broken and I can pull it loose. The good thing is that it also tells me that the PCV valve is good because when i pull it loose the engine idle changes. I could here it sucking air when my bro. reved the engine. I'm going to see if I can find a new vacum line for it. I'm sure i'll need to get it from the dealer because I can't find it on autozone's web site or advance auto's web site.