I just picked up a 95 S10 that has a few problems.

The truck is a manual with push button 4WD.
The truck is stuck in 4wd hi. I can shift to 4wd low also.
When i hit the switch for 2wd it makes a few clicking noises but the light never switches to 2wd and 2wd never engages.


Thanks for the help!

I just picked up a 95 S10 that has a few problems.

The truck is a manual with push button 4WD.
The truck is stuck in 4wd hi. I can shift to 4wd low also.
When i hit the switch for 2wd it makes a few clicking noises but the light never switches to 2wd and 2wd never engages.


Thanks for the help!


Check for transfer case codes and post back codes.
On the DLR problem read post below they have a problem close to yours.
And remember the emg brake switch is hooked up to the DLR module.
Hold it down or release it good and see if it makes any differance in them.
MT

will do, thanks