Our Community is 940,000 Strong. Join Us.


97 , pcm asd fuse no start


dawnnewsome3
01-30-2008, 10:10 PM
Hello, My 97 cirrus 2.4 Quit today blowing pcm asd fuse when you turn it over to start. Car turns over fine with the blown fuse, but it blows every time it is replaced, I know it has a dead short some where from me checking it with a meter. SO has any body had this type of problem, any help?, I would be thankful. I can trace all wires, Have no problems reading schematics, I'm just a EX GM mechanic so my ties are more GM oriented , But I do own a chrysler and a plymouth, so any pointers from some veterains or newwbies would help start me in the right direction before I check every line from the blown fuse on as it includes every thing from spark to fuel ect.. Thanks For any help. I will aso be posting in the stratus and breeze forums as these are the same body type.

dawnnewsome3
01-31-2008, 10:24 AM
Found it , wire to the coil pack was scorched no fusable link blown . Replaced complete wire and fixed it . Thanks .

Add your comment to this topic!