Our Community is 940,000 Strong. Join Us.


97 grand am v8 swap?


aptyk88
01-24-2008, 12:03 AM
so i got a 97 grand am and i just wanted to know how hard it would be to drop a caddilac northstar with an eldorado transmision in? any input would be greatly appreciated......

xeroinfinity
01-24-2008, 07:07 PM
:grinno: I don't think it would just "work" , without several hundred hours of fabrication.

Their is a 2000-2002 Grand Am that's rear wheel drive, and I think it has an LS motor. Thier's a link around here somewhere, think it's up on CarDomain.....
A newer Grand Am with RWD and a V8....that would be nice !! :evillol:

I dont even think the Eldorado trans would even bolt to the NS... :dunno:
But you would need to measure the subframe on the NorthStar and see how much bigger it is then the GA subframe then figure out how to engineer everything to make it work.

Good Luck and take pics !!

drdisque
02-06-2008, 07:43 PM
Eldorado's actually came with northstars (they were FWD), so it would come together in a matching engine-trans combination.

You'd have a heck of a time getting it to fit though (the Northstar is a big honkin engine).

It still would require quite a bit of fabrication though.

xeroinfinity
02-06-2008, 11:07 PM
it wouldnt real be worth it unless you just had the part lying around. Fabrications not cheap, especialy something custom as this would be.

If you are going to do it go with AWD :thumbsup: that would be super! :D

drdisque
02-07-2008, 07:07 PM
yeah, I can only advise it if you have a totalled Cadillac with a good engine, a clean grand am with a blown engine, a lot of space, a lot of equipment, and a lot of time on your hands.

Add your comment to this topic!