Our Community is 940,000 Strong. Join Us.


wiring for Home Link


KalilBaste
01-28-2003, 01:29 PM
Does anyone know how to wire the home line transmitter. There are three wires but I do not know where each one goes. One should be for ground, one for power and one for??


Help Please....!!

Shortbus
01-30-2003, 02:38 PM
Is the homelink for the garage door opener?

If so here are the wires and description.

The CTSY LP fuse 8 and CKT 40 (ORN) supply voltage at all times to the universal garage door opener (UGDO) Module.

The following components provide the UGDO module ground path:
CKT 1850 (PPL/YEL) or CKT 1850 (BLK)
G202


The body control module (BCM) on CKT 1382 (PPL/WHT) provides backlighting.

KalilBaste
01-30-2003, 03:44 PM
Thanks for the info...

It exactly what I needed!!

DRayBrad
06-20-2005, 05:56 PM
I am trying to put the homelink in my 1999 blazer. I bought a used console and am trying to wire it in but the wires are slightly different, can you recall how you wired yours in. The original without homelink has three wires going to the light assy, white, gray and black. The homelink has a fourth wire, orange. It looks like I will need to splice in a gray wire somewhere but not sure which wire to splice in to, any ideas would be appreciated.

thanks

Add your comment to this topic!