ok...dont know all that much about speakers but i have 2 10's and a 600 watt amp. they were working fine and then all of a sudden 1 day they didnt play. theres still power to the amp but neither of the subs play. i pulled 1 out after work real quick to see if it played in my house but when i looked at it the place that connects from the wire connection to the speaker is not connected to the speaker anymore. is there a way to fix this or am i screwed again?!?!:

try soldering it back on....... if that doesnt work, take it back to where u bought it from........ they should have some kind of warantee

Yea that's a quick fix. Either solder it on yourself (soldering gun is like $5), or get any speaker shop to do it for you, and they may charge you $5, or they might even do it for free. I would check the other speaker, cause unless you are running the speakers in series the other one should still play.:confused:

thanks 4 the ideas. i'm not sure what i'm gonna do with them and right now i got 2 12's on the way with a new amp so we'll see. my girlfriend wants them for her car

just buy new ones. there not too expensive. 1 or 2 10 w3 jl's would run like $250