|
|
2000 Chevy Malibufiftyplus 09-30-2007, 12:16 PM Need to know how to remove front door panels without damaging so I can put in new speakers moon03 09-30-2007, 07:26 PM Chiltons has the directions basic way is remove the cover for the mirrors (upper foreward) pry the switches out and disconnect, - door latch has one screw (torx head) the door pull has a cover with two screws behind it (7mm) then its just pry the panel off carefully I use a sctew driver and get close to the chips I start at the bottom as the panel top has a channel that has to lift up to clear. best bet is get a Chiltons mine is in the car. the switches on the passenger door I have taken off the drivers door may have screws holdinh the window switch and you pry the plastic off of it first. , again I havent done that door. the clips are a lot better than the ones in the older cars and putting the panel back is easy and its held as good as before you started. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|