I'm finishing up replacing the bearings on the passenger side and there was no torque specification for the hub nut in my haynes book, only the bearing assembly bolts. I'd like to get it all together asap and was wondering the specs on the hub nut if anyone can help. Thanks.

http://vsmus-origin.skf.com/Files/Brochures_in_PDF/457377.pdf


says...140

In that pdf on pg6 it says 103/140 with the heading saying "Front Proc or Torque Ft-lbs/Nm" so it's 103 Ft-lbs/140 Newton meters, right?

Yes, that's correct 103 Ft/lbs.

Thank you much for the help. Now I can finish up the passenger side and do the driver side!