I remember seeing an older thread reguarding the intermittent wipers, but i couldnt find it. anyway i just replaced the washer pump for the wipers, all works great now but the intermittemt setting doesnt work now when i rotate the knob for the wipers, and the wipers dont stay on for a few seconds after i spray the windsheild, they just come up once. they DO still work though on low, high and mist. im thinking it may have something to do with the switch, i tried my best not to disturb any of the wiring when i replaced the pump, i also made sure all connections were tight.

Did you plug the blue wire into the circuit board on the motor assembly?

I belive so, they were all working correctly when i put everything back together, only until a few minutes after i lost the intermittent feature, ill make sure again though.

i took off that black cover and all the wires seem in tact, i put the cover back on and the intermittent setting works again, wish i know what i did that made it work again. ill monitor it though if it happenes again. the blue wire is for the delay though?

Yes, the blue wire controls the delay. You might have just had a bad connection on it - removing it and reseating it cured the problem.