can anyone think of any inexpensive Probe HP adders/boltons?

oh yeha... and where can i find some cool body kits for a 2nd gen (93-97) probe....

thanx
-Lanster

Hi there.

Concerning your HP-Problems, you should first try to increase them by using an open Air-Filter AND a cold air intake. Otherwise it could happen that you got less afterwards. (f.e. K&N 57i kit)

For the Bodykits have try at Erebuni (http://www.erebuni.net/) .

But most of these Bodykits don't fit very well. So you should take your time to work on them.

thanx man

Go to www.Probetalk.com and search for HD CAI. It's a cold air induction you can build yourself for about 40 bucks. It doesn't look as good as a more expensive one would, but works just as good if not better. Also, my first mod waaaaay back when I first got my Probe was an MSD 6A box, if you don't know what that is, just go to your loca performance shop and ask them for one, they are about 120 bucks and come with all the directions you will need. In my opinion that is the biggest HP adder for your money (besides the CAI). Any other questions, feel free to contact me any way you can. :smoker2:

Hey Buzz if you want some kool body kits go to extremedimensions.com its much better than erebuni. I've looked at both extensively and erebunis only got one good kit that has to have alot of alterations to fit. Extreme dimensions has quite a few really good ones and one that I'm tryin to get my hands on. Just gotta get the car first. But you should definately check it out. As for HP adders, I'm not so sure. Good luck.