Headliner problems in 3rd gen
|
|
Headliner problems in 3rd gen tripod12133 05-29-2007, 07:36 PM
I am looking for a cheap new headliner for my 84 Z28 thats wrapped with black, just standard. The lowest price i found was on www.carupholsteryguys.com for $ 196.10 with it shipped to me. Anybody else know where i can get it cheaper ?? because 20 bucks is still alot of money where i come from. Any help is much appreciated. Mark. Morley 05-30-2007, 02:44 AM If it is a non T top car you can do it yourself easily. Check an upolstry shop for the material and the auto parts store for 3M spray on trim adhesive. SG007 05-30-2007, 11:05 PM ebay ikeyballz 05-31-2007, 06:11 AM not all the time tho, i tried doing a non-ttop car, in the hawaii humidity/heat the headliner still fell ;/ wrightz28 05-31-2007, 09:41 AM you can try it yourself, but if the padding is crumbling apart then your dunbar. Morley 05-31-2007, 11:16 AM you can try it yourself, but if the padding is crumbling apart then your dunbar. Not at all. You use a stiff bristle brush and scrub off the old foam. The new headliner material will come with the foam bonded to it. Morley 05-31-2007, 11:18 AM not all the time tho, i tried doing a non-ttop car, in the hawaii humidity/heat the headliner still fell ;/ I did one last summer here in coastal GA and it is holding "up" nicely. Temps were near 100 and humidity around 80% or more. wrightz28 06-01-2007, 10:08 AM Not at all. You use a stiff bristle brush and scrub off the old foam. The new headliner material will come with the foam bonded to it. True, but I have found that no matter how much you clean it up with the brush, and clean up afterwards, there's always little specs of it that the new foam doesn't like to adhere to. viperh 06-02-2007, 11:27 AM there is a headlinear one can buy thats just black plastic. I'll see if I can find the link.. found it stockinteriors.com yearone.com Great thing about these you can get it color matched or you can rattle can it and throw a clear coat on top and it looks pretty slick. tripod12133 06-02-2007, 07:45 PM (It is a T-TOP) well its a foam board.. and its really a piece of crap. its broken in 3 places and yea.. its not going to hold up much longer. i found a hard type of plastic or something headliner for 196.00 with shipping. anybody think i can get a better deal than that ?? Morley 06-03-2007, 01:26 AM (It is a T-TOP) well its a foam board.. and its really a piece of crap. its broken in 3 places and yea.. its not going to hold up much longer. i found a hard type of plastic or something headliner for 196.00 with shipping. anybody think i can get a better deal than that ?? Check E bay. There's a guy on there that sells the plastic ABS headliners in your choice of colors for about $150. I got one from him a couple years ago and it is a great piece. tripod12133 06-03-2007, 08:00 PM Yea i know but once you add shipping its 196.00, like i said. Morley 06-09-2007, 01:28 AM Yea i know but once you add shipping its 196.00, like i said. Then its time to scour the junkyards to see if you can find one in good shape that won't fall apart as you try to remove it and recover it. hotrod_chevyz 06-11-2007, 07:25 PM Buy some thin aluminum sheet metal, cut it to fit and cover it with whatever fabric you want with some spray/tube adhesive. Then screw it into place. tripod12133 06-21-2007, 06:03 PM Buy some thin aluminum sheet metal, cut it to fit and cover it with whatever fabric you want with some spray/tube adhesive. Then screw it into place. ha ha. nah thats alright. i think ill just buy one new. besides they say that the new plastic headliners are guaranteed to never fall or sag. guess ill just be saving up some money. thanks. ChevyRidinLow 08-18-2007, 09:43 PM might wanna replace the ttop seals first.... Related Links Enter the largest automotive community on the planet! |