So I hit a curb last week on the drivers side, and my front tire and rear tire got messed up. I checked the brakes, and everything looks fine, but the ABS light is still on. I replaced the driver side rear rotor, caliper, and backing pad, and it looks good, but the light is still on. The front looks all ok, so I don't know what the problem could be. Can anyone shed some light on this?

Might have done some sort of damage to the wheel sensors. If one of them go bad then the ABS light will come on. Have no clue how to check them besides taking to a garage to be tested, maybe somebody else might know a shade tree way of doing it.

Contact your dealer with questions. They have diagrams of the abs assembly and can most likley tell you whats broken without servicing the vehicle. Then you can get the part and replace it. It does sound like a wheel sensor of some sort.

Check the tone ring and wheel sensor on both wheels. If you had to replace that hardware in the back, there's a good chance one or both of the sensors got smooshes or the tone ring picked up a chip or 2.