14102193 Head Casting Know What Cc It Is?
|
|
CHRIS9007 04-01-2007, 01:29 AM
:banghead: DO NOT WHAT CC THIS HEAD IS LOOKED ALL OVER THE INTERNET NO LUCK ANY ADVISE WOULD HELP THANKS GUYS. CHRIS9007 04-01-2007, 01:30 AM Help Pls What Cc Could It Be? CHRIS9007 04-01-2007, 01:31 AM :banghead: ANY IDEAS LET ME KNOW. maxwedge 04-01-2007, 10:01 AM I'd buy a graduated burette, a piece of thin plexiglas for a cover on the combustion chamber drill a hole in the middle for the fill site and a small hole in the corner for a vent, use grease around the c'chamber for a seal fill the burette with room temp water and see what it is, usually you can get within 1-2c's this way, done it this way myself for years. BlenderWizard 04-01-2007, 10:09 AM I'd buy a graduated burette, a piece of thin plexiglas for a cover on the combustion chamber drill a hole in the middle for the fill site and a small hole in the corner for a vent, use grease around the c'chamber for a seal fill the burette with room temp water and see what it is, usually you can get within 1-2c's this way, done it this way myself for years. what he said and don't spam a thread your first time out. fred hill 09-24-2008, 07:13 PM 91 chevy 350 head casting 14102193 600cuin 09-24-2008, 07:43 PM Usually right around 66 to 68... :banghead: DO NOT WHAT CC THIS HEAD IS LOOKED ALL OVER THE INTERNET NO LUCK ANY ADVISE WOULD HELP THANKS GUYS. maxwedge 09-24-2008, 08:31 PM Gentlemen please check the dates before replying, this is way too old. Related Links Enter the largest automotive community on the planet! |
