Hello All,
I saw an artical on the front wheel bearing disassembily (4x4) and now can't find it. I'm thinking it was linked from this site but really cant remember. Can some point me to it? Need to tighten the bearings on my 2k Rodeo and hopeing I dont need the "special tool" to do it.

http://www.planetisuzoo.com/articles.htm?id=56&Isuzu_Front_Bearing_Repack

Thats the one! Thanks.

btw, many don't even use that modified wheel bearing hub nut tool to remove and to adjust the hub nut. they just use a screwdriver or small drift or punch in the slots and hammer carefully. it's not on very tight.

//bc