I know this was asked some time ago but I can't find the old thread. What do I need to replace. blower speeds 1-3 dont work 4and 5 are fine. Any help please.

Blower motor resistor card most likely. I had to change mine last year but in my case settings 1-4 didn't work.

I was a b**** to change. I suggest removing the passenger seat to give you more room to work.

Its not necessary to remove the seat :grinno:

Here is a link to the procedures.
Blower Motor & Resistor Removal - 99+ Grand Am (http://www.automotiveforums.com/vbulletin/showthread.php?t=665246)

True, but if I had to do it again the seat would be coming out.
Couldn't stand upright after crawling in there to change the card. :shakehead

I had a shop do it cause my dad was willing to pay (I think this was when I was still in high school?) and I was lazy :p

Great thanks for the info. Any place on the net to get the part cheaper then the dealer??

Great thanks for the info. Any place on the net to get the part cheaper then the dealer??

Most part stores carry them, Napa, advance, autozone.
I try to only buy electronic parts from Napa or the stealership.