Does anyone have an idea about changing out a multifunction switch on a 01 Ford Explorer Sports Trac?? Or maybe a website that will help!! Please help!! Thanks!!

It should be very simple. The few Fords that I have changed them out on were very similar. Two Phillips screws to take the steering column case off. The ignition key guide is just snaped on, it will pop out. And the multi switch is held on to the steering column by two hex screws (I beleive they're hex). If you have tilt streering, you might have to tilt the steering up or down and remove the tilt handle. The whole handle comes off by unscrewing it.

Denis