I had this info in another thread but the title was misleading.

I replaced my heater core in my 98 Blazer. After installing everything and also checking the airbag connections the airbag light is stuck on. After driving it this morning I noticed the cruise control light isn't coming on. The cruise works fine but the lamp in the dash doesn't come on. So here I am again asking for some advice on this problem. I have checked the airbag connections at least 5 times and all other electrical connections are also connected (as far as I saw).:banghead:

I'd get it scanned, really hate to see that airbag light on.

Hi,
Is the airbag light flashing when you turn the key? (selftest) or is it alltime on?
If not flashing during selftest when you turn the key I guess you maybe dammaged the wire to the airbag light? As your CC light does not work propperly either I think it might also be dammaged and is something to check...

//Freddy

I didn't check to see if it flashes yet, I'll do that. I am going to go get it scanned tomorrow or sometime soon.

O.K. I feel and surely look like an idiot!! It was the fuze. I sure as heck do not remember removing it! But my cruise light is still out, I guess I'll replace that bulb in the cluster. Thanks all for your advice!!:screwy:

My airbag light is also on as well as my CEL light. The airbag light flashes on startup (selftest) then stays on.

I ahve a 4.3 l in a '97 Jimmy. I just bought the car. The engine was replaced 100 miles ago. Before the engine replacement, the airbag light and CEL light were not on.

What to look for?

I would check all connections first. From what i found out if the airbag light flashes then stays on it is a connection. If it doesn't blink then it's a power issue(fuze).