ok i just rebuilt the 300 and it wont start it cracks and everything ive check fire its good and evrything is hooked up right and now im stumpt:banghead:

ok i just rebuilt the 300 and it wont start it cracks and everything ive check fire its good and evrything is hooked up right and now im stumpt:banghead:
Do you have the distibutor in right? I mean timed right. It could be 180 degrees off. Remember the engine makes 2 revolutions for every 1 turn of the distributor. You could even put a timing light on it and it would check okay and the above condition could exist. Also do you have fuel pressure at the schrader valve?

Yea thanks for the help anyways but after i posted this i went out and just started playing around with it and it started for me like turning the distriubter and so but thanks for the help anywayz