I just installed a viper remote start into my 2000 rodeo ls. It has remote door lock conection. Now every time I unlock the doors with the viper remote the alarm goes off. If I start it first with the remote it is fine. Is there a way to disable the factory alarm or send some sort of disarm pulse to the alarm. Some paper work I have says the alarm disarm is a yellow/blue wire in the drivers kick panel I te'ed off the unlock signal to this wire but the alarm still go off any one have any ideas.

well I just figureded it out. there are 2 white conectors in the drivers kick. The top one has a yellow/blue wire. you need to pulse this Neg to dis arm alarm. I just jumped of the door unlock works like a champ. hope this can help someone else out.