Hi all hope you like and if anybody knows how tell me how to most multiple pics. Thanks

Wow, that's great! It's very clean

Originally posted by 935k3
Hi all hope you likeI do! :wave:
Originally posted by 935k3
...if anybody knows how tell me how to most multiple pics.Look in the FAQ (either one) for "How to post pictures." ;)

Great model! I post multiple pics here much like the HHMB, but it's easier here. When you make a post, in the left column there's a heading above the "Your Reply:" column called vB Code and a help button to the right of the works vB Code. Instructions are in there down a ways titled "adding images" that should get you posting single or multiple pics into the body of your message. If you have any other questions, dig around here to get an email sent to me and I can help you further. Veyron told me you can also hit the attached file button multiple times as well, I'm used to using the easy code w/in the message box itself, and I have some control over spacing that way as well. Good luck! Glad to see your models here.

Originally posted by ZoomZoomMX-5
Veyron told me you can also hit the attached file button multiple times as well...The "attach file" function is limited to one file per post, at least on this site.

edit: How do I post images on this site? (http://www.automotiveforums.com/vbulletin/showthread.php?postid=578978#post578978)

;)

Very nice build!

:eek:


Nice work. THought I was looking at the real thing for a while :bloated:

good job, lets see some more pics

Excellent work on that 206 WRC.

That's is one very good model. Silver is very, very nice, door paneling clean, PE parts on bonnet, seat belts, aerials etc. all very good.

Well done! :wave:

Here is a pic of the chassis.

Vey nice pug that silver is perfect, can i ask wot spray paint u used, more pics:flash:

Another 206! Nice work and of course, more pics!

Thanks all for the compliments the silver wast Tamiya TS17 gloss aluminum and clear TS13

The details inside are just as good as on the outside. Very nice detail painting!

Im lost for words :eek: :eek:

That's a very nice looking pug you've built, great detail work also!

:eek2: I'm stunned by the inclusion of conavigator notes...and the headphones... :eek:

Fantastic job. It must be a real b!tch for them to get that spare out! :eek:

You are right I never thought about how hard it is to get the spare out.

Fantastic job. It must be a real b!tch for them to get that spare out!

You are right I never thought about how hard it is to get the spare out.

dont forget that tamiya seem to make ther rally car wheels a bit 2 wide so in real life the wheel would slide out under the roll bar and over the fuel cell easily.

I think Tamiya wants us to install the spare wheel no quite correctly. At least on the 2000 Pug WRC that I'm working on at the moment, I put the wheel like this: http://rallycars.topcities.com/reference/peugeot-206/rear/rear-01.jpg (WARNING: BIG PIC!!!)

Alex