Our Community is 940,000 Strong. Join Us.


95/E350/351/remove oil pan


almoststupid
09-29-2006, 05:50 PM
Curious,
Can oil pan be removed from my E-350 without removing engine?
:banghead:
I want to replace the pan gasket, however I'd just as soon do the oil pump while I am down there!
:nono:
A couple posts implied that gasket can be done, what about removal?

ModMech
09-29-2006, 06:09 PM
You CAN replace only the gasket w/o engine removal, and you *may* be able to replace the oil pump, but you CANNOT completely remove the oil pan w/o completely removing the engine from the van.

almoststupid
10-01-2006, 06:21 PM
Gracias ModMech


You CAN replace only the gasket w/o engine removal, and you *may* be able to replace the oil pump, but you CANNOT completely remove the oil pan w/o completely removing the engine from the van.

Fuely
10-11-2006, 04:41 PM
I have completely removed a oil pan on a 351W in a E250 van but had to remove the whole upper part of the fuel injection so the engine could be jacked up high enough to get the pan out.Took me 3 days. Pain in the A**.

asosa1
10-12-2006, 06:25 PM
changed the gasket and oil pump on a 85 300 6cyl. did it with just the room you can get with the pan dropped and the engine raised with the motor mounts loose. not real bad.

Add your comment to this topic!