im geting a used engine from a salvage yard to put in my 95,,,engine cranks n runs just fine,,,any body have instructions on how to remove my 95 n reinstall the 96 ??.. any body see any difficulties in doin this??....thanxz

IIRC, there was a change in the mounts on the Northstar engine at some point around then. Not sure which year. You might do well to verify that it will, in fact, bolt up. A factory manual would be ideal but the Chilton manual gives a pretty good write-up on removal ind reinstallation. The manual is about $20 in retail stores and at www.bn.com and www.amazon.com .