|
|
99 Conv-Blower Motor Resistor Keeps Blowing Out17bigmike 08-21-2006, 06:24 PM Hoping someone can help - I have a 99 Sebring Convertible - have replaced the blower motor resistor 3 times now @ $30 a piece. It works for a few days and then blows out again. :banghead: Any suggestions? Harryc3 08-22-2006, 07:30 AM Hoping someone can help - I have a 99 Sebring Convertible - have replaced the blower motor resistor 3 times now @ $30 a piece. It works for a few days and then blows out again. :banghead: Any suggestions? The OEM is no good #4885919AA Be sure to get the right replacement part. #5174124AA. Mine cost $36.57 from a dealer, no one else has the upgraded one. If yop didnot have to enlarge the opening to accept the new resister, you have the wrong one. If no settings work its probably a fan motor problem. If only the high setting works its possibly the resister. 17bigmike 08-22-2006, 09:32 AM Thanks - I will try that - MT-2500 08-22-2006, 10:45 AM Hoping someone can help - I have a 99 Sebring Convertible - have replaced the blower motor resistor 3 times now @ $30 a piece. It works for a few days and then blows out again. :banghead: Any suggestions? If it keeps blowing make sure all wire connections are good. If a blower motor is pulling to many amps it will kill the resistors. Run a amp draw test on blower motor. MT vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|